Slowly building up my first permanent #aprs #digipeater. Sadly it won't be on my QTH or callsign but regardless will serve a silent corner of the city. Every component is discarded, handed down equipment so cost is almost zero. If we are building a station why not with style...
#amateurradio #hamradio #amateurfunk #aprsdroid #igate

I hoard random garbage. Living in a small space in a modern hellhole city means I need to find uses for collected garbage all the time. A stolen commercial ad pole had been turned into #monoband 30m #hf #aprs #antenna for a friends use. It will be an #Igate.

I used coil from a failed antenna project so I cleared two useless thing at once.

Plus a decade long unused pop rivet gun proved it's worth today...
#hamradio #amateurradio #qrp #amateurfunk

Samstags kurz vor dem Mittagessen: noch eben die Tracker und iGate Software von CA2RXU ausprobieren. Macht einen sehr guten Eindruck und bietet viele Einstellmöglichkeiten: https://github.com/richonguzman #loraaprs #igate #tracker #hamradio #lorawx
richonguzman - Overview

Licenced Ham Radio (CA2RXU) Python/Raspberry/ESP32/Arduino lover Guitar Tube-Amp and Stompbox/Pedals builder - richonguzman

GitHub

Noch ein paar #PacketRadio-Tests gemacht. Ich bastel gerade an einem kleinen Instant-#Messenger in Python über #AX25-Verbindungen. Bremen hat zum Glück noch einen funktionierenden #Digipeater und über #igate kann man theoretisch auch (übers Internet getunnelt) von weiter weg einsteigen.

#HamRadio #Amateurfunk

@howardu that’s my #aprsfi marker for @howardu #hospital from my #igate Wb2ifs-10 but my #ht is not on the map
Playing around with #aprs at @howardu #college of #engineering #computerscience and #archtecture . I’m getting pinged but my signals not reaching the nearest #igate

Recently received a #LePotato board by @librecomputer.

My goal is to use this as a more power efficient replacement to my #RaspberryPi 3b, which currently serves as an #aprs #digipeater, #igate, and remote #wsjtx host.

First impressions: the documentation is pretty lacking, but the board itself seems well made.

More to come!

Hello all, I'm K6AUG, operator August, technician class, from just south of San Francisco, CA USA. I'm a member of the SF Amateur Radio Club, #SFARC #W6PW, and formerly with the UC Santa Cruz Amateur Radio Club #K6SLG.

I recently upgraded to a #Yaesu #FT5 #FT5DR HT, so my latest fixation is #APRS beaconing, and finally getting a proper #antenna outfitted on my car, and possibly setting up a tx/rx #iGate.

Dzisiejsze testy #APRS via #LORA po zmianie z 300bps na 1200bps poskutkowały znacznym spadkiem zasięgu. Jutro powrót do 300bps i dalsze testy #iGate wraz z #tracker w samochodzie. #SQ8W #hamradio
Release v22.46.0 · lora-aprs/LoRa_APRS_iGate

What's Changed Add devcontainer by @peterus in #193 add clang-format-11 support by @peterus in #194 ntp sync ota upload by @peterus in #198 fix for NTP booting on ETH Board by @dahuafschmied in #2...

GitHub