Thinking about building a DIY spectrometer — I already have a TCD1304 and the data processing should be straightforward. Really inspired by this project: https://www.thingiverse.com/thing:2215840@esbenrossel, any thoughts? Do you think the optics could be replaced with cheap CS‑mount lenses (e.g., from AliExpress) without losing too much performance? The Pentax Lenses are "expensive" (50€++) in Germany.
#DIY #Spectrometer #TCD1304 #OpenHardware #Optics #CSMount #Maker #CitizenScience #Thingiverse #Electronics
OtterVIS LGL spectrophotometer by esbenrossel

This is a 3D-printable spectrophotometer based on a TCD1304 linear CCD and standard 35mm camera optics. The resolution is ~1nm (the Na-doublet at 589nm is just exactly not resolvable).The total price of the components depends on how cheaply you can scavenge them on that auction site, but expect to pay something like this:Optics: 2x 10$, CCD: 10$, MCU: 15$, Grating: 3$, A few $$ for misc. parts.Total: ~60$

Thingiverse - The community for Open Hardware

FTIR Spectrometer LB-10FTIR - FTIR Analyzer

Labotronics FTIR Spectrometer is a microprocessor-controlled single beam system with precise optical scanning. It features corner cube optics, active collimation, and a stable interferometer for accurate performance.

https://www.labotronics.com/fourier-transform-infrared-spectrometer/lb-10ftir

#LabEquipment
#Spectrometer
#Labotronics

The difference between spectrometer and spectrophotometer lies in their purpose, complexity, and application. A spectrometer is a broad analytical tool used for studying the full spectrum of light across various scientific disciplines, while a spectrophotometer is a specialized instrument focused on measuring absorbance or transmittance for quantitative chemical analysis.
#spectrometer #wolink #ourmechanicalworld
https://www.ourmechanicalworld.com/archives/7365
Spectrometer Vs. Spectrophotometer: What's The Difference? - Ourmechanicalworld.com

In scientific research, industrial quality control, pharmaceuticals, environmental testing, and material science, the comparison “spectrometer vs

our mechanical world
Can a full spectrometer fit on a chip? This AI‑powered, #photon‑trapping #spectrometer uses just a few silicon detectors to capture detailed visible-NIR spectra. The result? Portable, low‑light sensing for health, environment, + beyond. 💡 Read more in #AdvancedPhotonics: https://bit.ly/401Hxrv

An #OpenSource, low-cost multinuclear #NMR #spectrometer operating in the mT field regime:

-high spectral resolution
-arbitrary #RF pulse programming
-requires #LabVIEW
-cost: k$ 20 (mainly PXI waveform generator & digitizer alone)
-cost could be driven down by half using a home-built RF amplifier made with high-power operational amplifiers

#NOpenAccess paper: https://doi.org/10.1016/j.jmr.2021.107076
#DIYbio #DIYchem #chemistry #analytics #ULF #spectroscopy

SciTech Chronicles.. . . . .May 12th, 2025

https://bit.ly/stc051225

#fossils #amber #temperate #rainforset #spatial #temporal #"fault slip" #Noto #Noachian #Hesperian #"shear waves" # "low-velocity layer" #FFT #ECG #"neural network" #"detection-on-a-chip" #Curiosity #spectrometer #sealing #consecutive

SciTech Chronicles. . . . . . . . .May 12th, 2025

Beware of the person of one book. Vol II No 36 262 links Curated Mission Control RSS Feed Wordpress SubStack Comments Buy Me A Coffee Ant...

Production and measurement of the extremely heavy, neutron-rich hydrogen isotope ⁶H achieved for the first time in an electron scattering experiment at the Mainz Microtron accelerator MAMI / Result shows stronger than expected interaction between neutrons within the nucleus 👉 https://press.uni-mainz.de/new-method-to-produce-an-extremely-heavy-hydrogen-isotope-at-the-mainz-microtron-accelerator-mami/

#NuclearPhysics #ParticleAccelerator #hydrogen #spectrometer #nucleus #neutrons

New method to produce an extremely heavy hydrogen isotope at the Mainz Microtron accelerator MAMI | Press and Public Relations

Johannes Gutenberg University Mainz