#PocketPotentiostat: #OpenSource framework for a #potentiostat, #galvanostat & #electrochemical #impedance #spectrometer:
- #voltammetry & #chronoamperometry (pA-0.1 A & ±12 V)
- #chronopotentiometry
- #EIS bandwidth: 0.1-1 MHz
https://doi.org/10.1021/acs.jchemed.1c00228
#DIYbio #electrochemistry #lab #instruments #science #research #STEM #MINT #education
#PUDELstat: An improved modular low-cost #OpenSource #potentiostat / #galvanostat for #electrochemical laboratories:
-#Arduino / #GUI -controlled
-requires #LabVIEW
-cost ~ US $40
https://doi.org/10.1021/acs.jchemed.3c01044
#DIYbio #chemistry #electrochemistry #lab #instruments #voltammetry
#SweepStat: An #OpenSource #DIY two-electrode #potentiostat for macroelectrode & ultramicroelectrode studies:
-measurements in the nA regime
-conduct cyclic #voltammetry & #chronoamperometry
-cost ~US $55
https://doi.org/10.1021/acs.jchemed.9b00893
#DIYbio #chemistry #electrochemistry #lab #instruments
Connecting potentiostat
Could you please document how the potentiostat is connected to the cell? Is it connected only on the two current collectors? Does that not mean that you could substitute it using a constant voltage source and just log current?
Sorry, I'm a total newcomer in battery testing, so this might be obvious to others.
New and improved DIY potentiostat/galvanostat for battery charge/discharge cycling
A few months ago, the potentiostat I was using for my battery cycling experiments got damaged with some liquid. The previous potentiostat I used was described in this post. Since a few years have passed since this potentiostat came out, I decided to look at the literature and find any other implementations that might have improved on that previous design. This is how I found the Mystat design, which was published in this paper. Fully assembled MyStat potentiostat The Mystat design […]
Bose-Einstein-Kondensat
sepi
danielfp