Show threadAilbheJun 30, 2023
To sew near the edge of the folded seam, I set the needle over to the left -- when I try to sew a fold like this with the needle centred, the right hand side of the presser foot often picks the edge of the fold up slightly. This way stops that.
Show threadAilbheJul 1, 2023

I'm removing basting stitches with tweezers because my own fingertips won't grasp the thread.

By the time this shirt is finished it's going to be so handled and crumpled that it will look like it's been slept in. #SewingWhileDisabled #Sewing

Show threadAilbheJul 2, 2023
I'm trying to figure out how to make the collar. I don't understand. It's complicated and I don't like it. Why did I decide to make a shirt? Why am I sewing at all? I should go and sit in a cave and eat berries.
Show threadAilbheJul 2, 2023
Ohhhhhh, clipping the CORNERS. That's actually kind of magically necessary. I'm stopping for now because the next bit is clipping all the seams and pressing, and I'm a million times too tired. And I think I want the big ironing board, not the little sleeve board I've used for most of the "press one seam" stuff.
Show threadAilbheJul 2, 2023
My first hand-sewn buttonhole. I used Nicole Rudolph's recent video and it works. For my first one I used a very stable weave cambric, but I'm going to practice on the terrifying slithery linen too. The shirt only needs six buttonholes total so that's ok.
#Sewing #Buttonholes
https://youtu.be/Z6C4DUW0bho
The Ultimate Guide to Hand Sewing Buttonholes

YouTube
Show threadAilbheJul 2, 2023
Ok I think this is going to be a shirt one day. It needs quite a lot of work but it's basically going to function as a garment.
Show threadAilbheJul 3, 2023
I've started: got out the big ironing board and I'm now ironing a bit, clipping seams a bit, ironing a bit, clipping seams a bit. It'll probably be fine. All the grey basting is coming out. It'll probably be fine. What's the worst that can happen? I wish I hadn't thought that. #sewing
Show threadAilbheJul 3, 2023

I think

it's a collar #Sewing

Show threadAilbheJul 4, 2023

Many thanks to @elfkin for his advice on how to achieve sleeve. This is the armpit of the shirt, where two felled seams cross over each other and I sang hymns of praise to my walking foot, which I got in September 2020 and have never regretted.

I did recently buy a felling foot, on Chris's advice, but it was completely unsuited to this job so I haven't used it properly yet. Wrong fabric. #Sewing

Show threadAilbheJul 7, 2023
I finished the shirt. It's a little short so I'll make it longer in future, but it's GREAT. I'm so pleased with it. The linen is much too drapey and soft for the pattern but it's a functional garment and all the internal seams finished nicely so the wearer is almost completely unaware of the clo once clothed. #Sewing
Show threadAilbheJul 7, 2023
I have found an old sheet with which to line a curtain so tomorrow I'll make a curtain. Yay!
Show threadAilbheJul 10, 2023
I made that curtain yesterday, which was straightforward except for the metal eyelets at the top, and today I'm hoping to make a dress or a top in ace flag stripes. I'm a little concerned about the pattern matching but it might be fine. I may have to make the sleeves out of plain purple or black. #Sewing #Asexual
Show threadAilbheJul 10, 2023

I have gone downstairs and made people help me clear the paperwork and tech debris off the dining table. This will be the first project for which I have more than an A1 sized space for drawing and cutting. I'm really looking forward to it. I have to match stripes so space will REALLY help.

I just need to wait until after lunch. Dining, after all. #Sewing

Show threadAilbheJul 10, 2023
I've traced the pattern and laid the main bits out on the fabric to prove I can match the stripes. I'm now resting before cutting the fabric.#Sewing
Show threadAilbheJul 10, 2023
It's so much easier to cut out when the whole piece fits on the surface at once. OMG. #Sewing
Show threadAilbheJul 11, 2023
Today I started by stitching the cut ends of three new pieces of fabric so that they don't fray when we wash them at 90C to pre-shrink before making them up into anything. #Sewing
Show threadAilbheJul 11, 2023
I have also stay-stitched the neck and arm holes on the dress pieces and started pinning the long seams, matching the stripes, but I've ground to a halt because I remembered pockets. I need to make and place pockets now, not add them in later.
Show threadAilbheJul 11, 2023
I am not the most sensible person. I have pattern-matched the stripes on the pockets so that if they are turned inside out it will look stripy. Before I even start on the sleeves. *whimper*.
Show threadAilbheJul 12, 2023

Chose thread colour, pinned things, did NOT attempt to pattern match the stripes on the sleeves, now I'm at the stage of actually SEWING. Wish me luck.

#sewing

Show threadAilbheJul 12, 2023
Pausing to eat but the pockets are done, the side seams are fauxverlocked, the neckline is finished, and I've hemmed one sleeve. I've lost my needle threader so tidying the threads on that hem will have to wait. I still need to hem the other sleeve and the skirt.
Show threadAilbheJul 12, 2023
(I gave my spare needle threader to the offspring teaching themselves bookbinding, because of course I did.)
Show threadAilbheJul 12, 2023
Almost all hemming done, all that's left tomorrow is a bit of thread tidying. I can do all that by hand without clearing my sewing space (boxes of fabric and piles of haberdashery live on the chair and table beside the sewing machine, and move to the bed for me to use it).
Show threadAilbheJul 13, 2023

I finished the dress! It's Ellie and Mac Slow Sunday dress with mid-scoop neckline, fuller skirt, and short sleeves. I added the pockets to the pattern myself because they were inexplicably omitted by the designer.

I was going to make the high neckline but it would have needed a complete Full Bust Adjustment, whereas with the mid scoop neckline it just needs a decent bra.

#Sewing #Asexual #LGBTQA

Show threadAilbheJul 13, 2023
After finishing the dress, and eating a curry while wearing a white shirt, and rinsing the white shirt in cold water and putting stain remover on it, I ironed five metres of 150cm wide linen. That's enough for today.
Show threadAilbheJul 14, 2023
Today I've mended the corner of a duvet cover by patching inside with two triangles taken from a torn bedsheet, along the original overlocked seam. It meant feeding the whole length of the bag through the machine and then not sewing both sides together by accident, but I did it. #mending #sewing
Show threadAilbheJul 14, 2023
Ironed 3m of 1.5m wide shirting cotton. Lying down now. But there's only one big piece of newly acquired fabric left to iron.
Show threadAilbheJul 15, 2023
Today I looked again at the princess-seam, button-front top/dress I'm trying to adapt. I learned things since I last looked at it and I'm going to do slightly bolder adjustments before giving up entirely and finding a new starting point. #Sewing https://mastodon.art/@artbyailbhe/110300145057261071
Ailbhe (@[email protected])

Attached: 1 image Stage one, the bust alteration is good. Next, waist alteration, I think.

Mastodon.ART
Show threadAilbheJul 16, 2023

So today I avoided adjusting the top by starting on a pincushion I can wear on a finger so it's handy when I'm fitting things or ironing things.

Long long ago, when I made facemasks, the fabric layout resulted in a lot of same-shape scraps. I kept them because they looked like leaves or feathers or something. #Sewing #ScrapBusting

Show threadAilbheJul 16, 2023
I pinned some together and with 2.5mm seam allowances it takes eight to make a ball. And obviously a flat ball is a flower.
Show threadAilbheJul 16, 2023
When I sew, I put my thread offcuts into a little bag clipped near my sewing machine. Very tiny snippets of fabric go in there too. Only 100% natural fibres though, because of the reasons.
Show threadAilbheJul 16, 2023
I got my cardboard bobbins of old basting thread, which I save for handsewing, and started stuffing and quilting the ball. #Sewing #ScrapBusting
Show threadAilbheJul 18, 2023
I finished my pincushion! Now we find out if it's better than holding everything in my mouth until I get back to a table. #Sewing
Show threadAilbheJul 19, 2023
Yesterday I went back to this top. I slit all the seams from hem to under the bust, and pinned wildly. I clipped a few curves to make things work better. Today I'm going to sew up the amendments and have a think.
https://mastodon.art/@artbyailbhe/110300145057261071
Ailbhe (@[email protected])

Attached: 1 image Stage one, the bust alteration is good. Next, waist alteration, I think.

Mastodon.ART
Show threadAilbheJul 19, 2023
I started by sewing yesterday's modifications and taking photos so I could see. It's basically the right size -- the places where it was much too big have been almost eliminated. After taking these photos I spent the rest of my sewing session trying to fix the shape of the bust, but I stopped before I got tired enough to make mistakes. Even before modifying today, it fit the various essential measurements well enough to allow for following my basic shape and allowing movement, breathing etc.
Show threadAilbheJul 19, 2023
I did wake up tired today so it was all very slow. But that's an #mecfs thing, not the fault of the garment.
Show threadAilbheJul 20, 2023
I've started today by unpicking the seams either side of the back panel, from the hem to near the armscye, and pinning to make it slightly wider across the hips. I think that will remove the triangle in the small of my back. But I'm expecting to need additional fabric, not just what's in the original pieces, so I'll try this on pinned rather than baste. When I can stand, I mean. #Sewing
Show threadAilbheJul 20, 2023
I pinned the back again and I think this works. I definitely think this works well enough to attempt to make a new pattern. So now I'm going to iron it to eradicate my pen marks and then go over both sides of every seam with marker, unpick it, and trace it.
Show threadAilbheJul 20, 2023
... first I'm sorting my scraps of tracing paper on case any will be useful
Show threadAilbheJul 20, 2023

I had used orange frixion pen to mark the fabric as I was pinning it etc so I used black to trace along all the basted seams on both sides before unpicking them.

Then I could lay the fabric flat under my tracing paper, and copy the new black seams in orange. And finally I used the original pattern under the newly traced one to see how different it is -- very. #Sewing

Show threadAilbheJul 21, 2023
Truly I can procrastinate this process forever. I know doing this work now will lead to years of blissful clothes-making but I want to skip this step.
Show threadAilbhe
Yesterday I transferred the pattern to paper and cut the pieces out, but today I realised that I'd been so tired I skipped all the marks, and also I'd cut the edge furthest from me really poorly, so today I fixed that and started assembling. I'm again really tired so I didn't get much done. #Sewing
Jul 22, 2023 at 9:56pmWeb
Show threadAilbheJul 23, 2023

I did it! It's not ironed but I'm so pleased with myself. I want to finish it off now -- seams and neckline and buttons -- but I'm satisfied that my paper pattern is good enough.

After taking these photos I had a phonecall in the warmest bit of my space before changing out of it and now the underarms are a bit ick. I'm going to rinse them in cold water and then finish sewing. #Sewing

Show threadAilbheJul 23, 2023
I'm going to try to design a sleeve. The sleeve head in the sheet at the back of "The Collins Complete Book of NEEDLECRAFT" (1981) is about the right size to start with, and there's a diagram of how to change the shapes inside.
Show threadAilbheJul 23, 2023
I used the green gingham mockup to test my sleeve shape, because I have ZERO spare fabric, and then made sleeves. Tomorrow I might get as far as facings. #Sewing
Show threadAilbheJul 24, 2023
I'm trying to decide how much I need in terms of facings. I might only want to bind the collar and reinforce the placket to hold the buttons. I'm not sure how to decide.
Show threadAilbheJul 24, 2023
... I don't have any buttons I like. I think I'm going to cover buttons instead. Somebody stop me.
Show threadAilbheJul 24, 2023
I've made pattern pieces for neckline facings and cut them out of the fabric scraps.
Show threadAilbheJul 24, 2023
I've done a button and a buttonhole. I'm so close to finishing. It's just that the finishing is the time consuming, fiddly part. And involves a LOT of ironing. #Sewing
Show threadAilbheJul 24, 2023
I've typed up instructions so that next time I make this I know what order to do things in so that all the felled seams are neat, and tomorrow I'll do more actual sewing. I need to do buttonholes and attach and cover buttons, fell down the seams, and finally hem it.
Show threadAilbheJul 25, 2023
Mended jeans -- belt loop tore a hole in the back so I reinforced both rear side belt loops and reattached the flapping one. #Sewing #Mending
Show threadAilbheJul 27, 2023
Today I mended a duvet cover using my new vintage sewing machine from 1940 (not to be confused with my old modern machine from 1990-ish) and it was SO EASY. The extra space in what I believe we call the "harp" made a huge huge difference.
#Sewing #Mending #SewingMachine (link to thread with pictures of the vintage machine: https://mastodon.art/@artbyailbhe/110780146951341100)
Ailbhe (@[email protected])

Attached: 4 images The case of my 1940 Singer 201K handcranked sewing machine. The way the storage and case works is so, so simple and clever. #SewingMachine #Sewing

Mastodon.ART
Show threadAilbheJul 28, 2023
Today I tried to fell the seams on the top I'm making and when I was trimming the seam allowance I cut through the actual garment in TWO places, though I'll be able to mend it by sewing it down to the folded seam inside, and then when I tried sewing it I went WILDLY wrong. I think my felling foot can only really handle straight lines and *mild* curves, not the bust on this shirt's princess seams. I mean the princess seams on this shirt's bust. I'm so tired.
Show threadAilbheJul 28, 2023
Yes, of course I'm basting them *from now on*, I just thought I didn't have to. Pff.
Show threadAilbheJul 29, 2023
Felling down the curves on princess seams for a bust that is 25% bigger than the underbust is *tricky*. #Sewing
Show threadAilbheJul 30, 2023
Hemmed it. Only buttons and buttonholes yet to do. Memo to self: sort out hem length on the pattern pieces, they were crenellated like a moderately well-defended English church.
Show threadAilbheJul 31, 2023
The top fits. I can do my hair while wearing it, which involves a lot of moving my arms right around behind and above my head. I can stand up straight or slouch -- which makes it look slouchy but doesn't make it tight anywhere or seem to strain any of the seams.
Show threadAilbheAug 1, 2023
So today I'm looking at my chair cover. I bought the fabric AGES ago -- possibly years? -- but I was going to wait until I had rewebbed the seat. I'm not going to do that. The cover I'm replacing was made with a remnant which wasn't quite big enough but it will still give me a good idea of how to start, I'll just have much more in the way of seam allowances so I'll be able to finish it better. I think my mother made it 15 years ago. #Sewing #Mending #Upholstery
Show threadAilbheAug 1, 2023
The first thing is to unpick the old cover and trace around the bits onto pattern paper, I guess.
Show threadAilbheAug 1, 2023
Unpicked AND LABELLED the two seat side pieces, both of which were originally pieced because there wasn't enough fabric and my mother wasn't working from a pattern of any kind. I'm too tired to trace them today but I can do it tomorrow perhaps. I notice that they're not identical. #Sewing #mecfs
Show threadAilbheAug 2, 2023
Today I am mending and altering: first, shortening bra straps 3½"/8.5cm (folded length)
Show threadAilbheAug 3, 2023
And today I did some hand mending, because this shirt is too feeble to darn with a machine zigzag but not quite destroyed enough to go into the rag bag. When I got it, it was smart enough to wear for parent-teacher meetings. #Mending #Darning #Sewing
Show threadAilbheAug 4, 2023

So I'm back at the chair cover. I've unpicked all the pieces I think I need to, to make pattern pieces, and I've started tracing around them. But I've realised I need to learn a lot more about inserting a zip, because this looks very neat and I don't know how to do that.

#Sewing

https://mastodon.art/@artbyailbhe/110813772022830155

Ailbhe (@[email protected])

Attached: 3 images So today I'm looking at my chair cover. I bought the fabric AGES ago -- possibly years? -- but I was going to wait until I had rewebbed the seat. I'm not going to do that. The cover I'm replacing was made with a remnant which wasn't quite big enough but it will still give me a good idea of how to start, I'll just have much more in the way of seam allowances so I'll be able to finish it better. I think my mother made it 15 years ago. #Sewing #Mending #Upholstery

Mastodon.ART
Show threadEllenInEdmonton Jul 29, 2023
@artbyailbhe
Eeeh!! Provide progress reports, please. I have princess seam dreams but I think it will take a while for them to come true.
Show threadAffieniaJul 29, 2023
@artbyailbhe I cannot even begin to imagine managing that.
Show threadAilbheJul 29, 2023
@Affienia I imagined ok, it's reality that's giving me trouble
Show threadAffieniaJul 29, 2023
@artbyailbhe 😂
Show threadRivikahJul 29, 2023
@artbyailbhe oh yeah... fancy feet don't like to do nonstandard shapes. (Or, in my experience, anything besides straight lines. )
Show threadAilbheJul 29, 2023
@Rivikah I'll know better next time. It will just have to involve a lot more ironing.
Show threadThomas =:-)Jul 24, 2023
@artbyailbhe stop?
Show threadEllenInEdmonton Jul 24, 2023
@artbyailbhe
Super cute! Well done to have the patience and the skills to figure out the exact pattern/style that works for you! I intend to figure out a bodice like that but there are always projects that are more fun which get in the way.
Show threadAilbheJul 24, 2023

@EllenInEdmonton it's one that came free as a printable, I just changed the bust height, increased the bust size, raised the waist, narrowed the back, reduced the waist, increased the hips, added sleeves -- ah. Hm.

The neckline is unaltered, so far.

Show threadEllenInEdmonton Jul 24, 2023
@artbyailbhe
Haha, isn't it great that they did all that work for you?!🤣​
I have a couple of bought patterns that I like but which also need considerable adaptation to really be ME! I'll probably work on them during an extended sewing session like a retreat. Although I want the finished result of a bodice that's ideal for me, it's tedious work to get there and I struggle with tedium!
Show threadAilbheJul 24, 2023
@EllenInEdmonton I did leave this whole project untouched for almost two whole months halfway through.
Show threadEllenInEdmonton Jul 24, 2023
@artbyailbhe
I can easily leave these tedious projects for a LOT longer than that! However, I finally finished my #WearableMuslin of a pair of shorts (made with a repurposed sheet) including #FrenchSeams and #pockets. They're wearable but the pocket openings are too tiny to be effective.
Show threadChris 🏳️‍🌈🧵🧝🏼Jul 24, 2023
@artbyailbhe This looks great!!!
Show threadAlexJul 22, 2023
@artbyailbhe cool fabric!