Ohhhhhh, clipping the CORNERS. That's actually kind of magically necessary. I'm stopping for now because the next bit is clipping all the seams and pressing, and I'm a million times too tired. And I think I want the big ironing board, not the little sleeve board I've used for most of the "press one seam" stuff.
My first hand-sewn buttonhole. I used Nicole Rudolph's recent video and it works. For my first one I used a very stable weave cambric, but I'm going to practice on the terrifying slithery linen too. The shirt only needs six buttonholes total so that's ok.
#Sewing #Buttonholes https://youtu.be/Z6C4DUW0bho
The Ultimate Guide to Hand Sewing Buttonholes
Ok I think this is going to be a shirt one day. It needs quite a lot of work but it's basically going to function as a garment.
I've started: got out the big ironing board and I'm now ironing a bit, clipping seams a bit, ironing a bit, clipping seams a bit. It'll probably be fine. All the grey basting is coming out. It'll probably be fine. What's the worst that can happen? I wish I hadn't thought that.
#sewingI think
it's a collar #Sewing
Many thanks to @elfkin for his advice on how to achieve sleeve. This is the armpit of the shirt, where two felled seams cross over each other and I sang hymns of praise to my walking foot, which I got in September 2020 and have never regretted.
I did recently buy a felling foot, on Chris's advice, but it was completely unsuited to this job so I haven't used it properly yet. Wrong fabric. #Sewing
I finished the shirt. It's a little short so I'll make it longer in future, but it's GREAT. I'm so pleased with it. The linen is much too drapey and soft for the pattern but it's a functional garment and all the internal seams finished nicely so the wearer is almost completely unaware of the clo once clothed.
#SewingI have found an old sheet with which to line a curtain so tomorrow I'll make a curtain. Yay!
I made that curtain yesterday, which was straightforward except for the metal eyelets at the top, and today I'm hoping to make a dress or a top in ace flag stripes. I'm a little concerned about the pattern matching but it might be fine. I may have to make the sleeves out of plain purple or black.
#Sewing #AsexualI have gone downstairs and made people help me clear the paperwork and tech debris off the dining table. This will be the first project for which I have more than an A1 sized space for drawing and cutting. I'm really looking forward to it. I have to match stripes so space will REALLY help.
I just need to wait until after lunch. Dining, after all. #Sewing
I've traced the pattern and laid the main bits out on the fabric to prove I can match the stripes. I'm now resting before cutting the fabric.
#SewingIt's so much easier to cut out when the whole piece fits on the surface at once. OMG.
#SewingToday I started by stitching the cut ends of three new pieces of fabric so that they don't fray when we wash them at 90C to pre-shrink before making them up into anything.
#SewingI have also stay-stitched the neck and arm holes on the dress pieces and started pinning the long seams, matching the stripes, but I've ground to a halt because I remembered pockets. I need to make and place pockets now, not add them in later.
I am not the most sensible person. I have pattern-matched the stripes on the pockets so that if they are turned inside out it will look stripy. Before I even start on the sleeves. *whimper*.
Chose thread colour, pinned things, did NOT attempt to pattern match the stripes on the sleeves, now I'm at the stage of actually SEWING. Wish me luck.
#sewing
Pausing to eat but the pockets are done, the side seams are fauxverlocked, the neckline is finished, and I've hemmed one sleeve. I've lost my needle threader so tidying the threads on that hem will have to wait. I still need to hem the other sleeve and the skirt.
(I gave my spare needle threader to the offspring teaching themselves bookbinding, because of course I did.)
Almost all hemming done, all that's left tomorrow is a bit of thread tidying. I can do all that by hand without clearing my sewing space (boxes of fabric and piles of haberdashery live on the chair and table beside the sewing machine, and move to the bed for me to use it).
I finished the dress! It's Ellie and Mac Slow Sunday dress with mid-scoop neckline, fuller skirt, and short sleeves. I added the pockets to the pattern myself because they were inexplicably omitted by the designer.
I was going to make the high neckline but it would have needed a complete Full Bust Adjustment, whereas with the mid scoop neckline it just needs a decent bra.
#Sewing #Asexual #LGBTQA
After finishing the dress, and eating a curry while wearing a white shirt, and rinsing the white shirt in cold water and putting stain remover on it, I ironed five metres of 150cm wide linen. That's enough for today.
Today I've mended the corner of a duvet cover by patching inside with two triangles taken from a torn bedsheet, along the original overlocked seam. It meant feeding the whole length of the bag through the machine and then not sewing both sides together by accident, but I did it.
#mending #sewingIroned 3m of 1.5m wide shirting cotton. Lying down now. But there's only one big piece of newly acquired fabric left to iron.
Today I looked again at the princess-seam, button-front top/dress I'm trying to adapt. I learned things since I last looked at it and I'm going to do slightly bolder adjustments before giving up entirely and finding a new starting point.
#Sewing https://mastodon.art/@artbyailbhe/110300145057261071
Attached: 1 image
Stage one, the bust alteration is good. Next, waist alteration, I think.
So today I avoided adjusting the top by starting on a pincushion I can wear on a finger so it's handy when I'm fitting things or ironing things.
Long long ago, when I made facemasks, the fabric layout resulted in a lot of same-shape scraps. I kept them because they looked like leaves or feathers or something. #Sewing #ScrapBusting
I pinned some together and with 2.5mm seam allowances it takes eight to make a ball. And obviously a flat ball is a flower.
When I sew, I put my thread offcuts into a little bag clipped near my sewing machine. Very tiny snippets of fabric go in there too. Only 100% natural fibres though, because of the reasons.
I got my cardboard bobbins of old basting thread, which I save for handsewing, and started stuffing and quilting the ball.
#Sewing #ScrapBustingI finished my pincushion! Now we find out if it's better than holding everything in my mouth until I get back to a table.
#SewingYesterday I went back to this top. I slit all the seams from hem to under the bust, and pinned wildly. I clipped a few curves to make things work better. Today I'm going to sew up the amendments and have a think.
https://mastodon.art/@artbyailbhe/110300145057261071Attached: 1 image
Stage one, the bust alteration is good. Next, waist alteration, I think.
I started by sewing yesterday's modifications and taking photos so I could see. It's basically the right size -- the places where it was much too big have been almost eliminated. After taking these photos I spent the rest of my sewing session trying to fix the shape of the bust, but I stopped before I got tired enough to make mistakes. Even before modifying today, it fit the various essential measurements well enough to allow for following my basic shape and allowing movement, breathing etc.
I did wake up tired today so it was all very slow. But that's an
#mecfs thing, not the fault of the garment.
I've started today by unpicking the seams either side of the back panel, from the hem to near the armscye, and pinning to make it slightly wider across the hips. I think that will remove the triangle in the small of my back. But I'm expecting to need additional fabric, not just what's in the original pieces, so I'll try this on pinned rather than baste. When I can stand, I mean.
#SewingI pinned the back again and I think this works. I definitely think this works well enough to attempt to make a new pattern. So now I'm going to iron it to eradicate my pen marks and then go over both sides of every seam with marker, unpick it, and trace it.
... first I'm sorting my scraps of tracing paper on case any will be useful
I had used orange frixion pen to mark the fabric as I was pinning it etc so I used black to trace along all the basted seams on both sides before unpicking them.
Then I could lay the fabric flat under my tracing paper, and copy the new black seams in orange. And finally I used the original pattern under the newly traced one to see how different it is -- very. #Sewing
Truly I can procrastinate this process forever. I know doing this work now will lead to years of blissful clothes-making but I want to skip this step.
Yesterday I transferred the pattern to paper and cut the pieces out, but today I realised that I'd been so tired I skipped all the marks, and also I'd cut the edge furthest from me really poorly, so today I fixed that and started assembling. I'm again really tired so I didn't get much done.
#SewingI did it! It's not ironed but I'm so pleased with myself. I want to finish it off now -- seams and neckline and buttons -- but I'm satisfied that my paper pattern is good enough.
After taking these photos I had a phonecall in the warmest bit of my space before changing out of it and now the underarms are a bit ick. I'm going to rinse them in cold water and then finish sewing. #Sewing
I'm going to try to design a sleeve. The sleeve head in the sheet at the back of "The Collins Complete Book of NEEDLECRAFT" (1981) is about the right size to start with, and there's a diagram of how to change the shapes inside.
I used the green gingham mockup to test my sleeve shape, because I have ZERO spare fabric, and then made sleeves. Tomorrow I might get as far as facings.
#Sewing
Ailbhe
EllenInEdmonton 
Affienia
Rivikah
Thomas =:-)