HackadayNeither Android nor iOS: DIY Smartphone Runs on ESP32!
Neither Android nor iOS: DIY Smartphone Runs on ESP32! https://hackaday.com/2026/03/04/neither-android-nor-ios-diy-smartphone-runs-on-esp32/
#CellphoneHacks #4gmodem #Arducam #ESP32S3 #Opensourcesmartphone #Smartphone
#CellphoneHacks #4gmodem #Arducam #ESP32S3 #Opensourcesmartphone #Smartphone
Raspberry Pi CM5-based outdoor PoE security camera features 12.3 MP IMX500 sensor, IP66 enclosure
Video Processing WikiARDUCAM
#Arducam is very active with both low end #RaspberryPi and high end Nvidia #Jetson cameras. They have an interesting camera stack for connecting lots of different cameras to USB 2 and 3.
https://www.arducam.com/
Via
https://wiki.pythonlinks.info/arducam
flip phillipsA first look at the ChumpCam
Some photos of the Pi Based, Arducam driven camera system.
https://flipphillips.com/bloggery/a-first-look-at-the-chumpcam/
#Bloggery #classes #RITVP #arducam #pi #projects
Some photos of the Pi Based, Arducam driven camera system.
https://flipphillips.com/bloggery/a-first-look-at-the-chumpcam/
#Bloggery #classes #RITVP #arducam #pi #projects
Bose-Einstein-KondensatA modular hand-held #OpenSource #fluorescent #camera unit for #wound #imaging:
-custom #3Dprinted housing
-based on #RaspberryPi & #ArduCam 21MP
-3 independent #LED channels
https://doi.org/10.1038/s42003-025-08423-y
#DIYbio #lab #instruments #fluorescence #microscope #microscopy #NO #pH #ML
André M ChagasPacking... #microscope, #robotics, #arducam, #esp32 plus your random slide samples and UV cured glue...
Now to carefully put this around clothing, not to damage things.. #openhardware #openscience
Now to carefully put this around clothing, not to damage things.. #openhardware #openscience
Top DIY Electronics#Arducam Pivistation 5 - Raspberry Pi 5 Camera Kit with Select Sensors, Lenses, and Pre-Installed Software
https://www.diyelectronics.us/2024/04/arducam-pivistation-5-raspberry-pi-5.html
https://www.diyelectronics.us/2024/04/arducam-pivistation-5-raspberry-pi-5.html
ishotjr ✨💙✨💗✨Woohoo, @arduino's multitouch #GIGA Display #Shield arrived just in time for #ArduinoDays2024! Can't wait to take advantage of the integrated #Arducam connector in my next project! 🤘📺🤘
Kernel Bob 
Dummy13 opened my eyes to the fact that our printers can do high precision, tiny mating parts. I've been way too cautious in my designs.
Here's my new ArduCam (Raspberry Pi Camera compatible) enclosure. The side walls are 0.3mm, the walls around the M2 screw heads are 0.1875mm, and the clips above the other screw holes are 0.6mm at the tips. The two halves lock together nicely.
0.15mm layer height, Prusa MK4, generic PETG.
#ArduCam #RaspberryPi #Prusa3D #3DPrinting #3DModeling #Dummy13
