Duck duck fedi: our 3d printer is having a issue where there's oscillation between extruding correctly and under extruding

Its a cr-10s frame and motors with a ender 3x 4.2.2 motherboard, extruder, fans, and psu with custom Marlin firmware as the configs are here https://github.com/Gonzukum/cr-10s-ender-3-franken-firmware-config-motherboard-2.2.2

We are needing to get it to print correctly for parts of our bus like the cupholder, the vents, the fog light mounts, our Jetson nano android tablet that's also used for android auto and the AdBlock and anti data collection dns server

#3dprinting #diy3dprinter #DuckDuckFedi #askfedi #askmastodon #tech #technology

Double Boop for Double Dragon:

https://forum.zen3d.hu/d/57-doubledragon-pandorabox-g2z

#diy3dprinter #voron

Monolith Zero's door:

"Another thing that's very important to me is the 270-degree door. I've spent nearly a day working on the hinge location to keep the seamless integration of the door."

https://monolith-gantry-updates.zen3d.eu/design-considerations-for-maintenance/

#3Dprinting #diy3dprinter

The design of Monolith Zero is taking shape.

https://monolith-gantry-updates.zen3d.eu/form-factor-changes-monolith-zero/

#Voron #diy3dprinter #3dprinter

An exciting test of the Carbonara carbon fiber X beam prototype. What makes Carbonara special is its ability to withstand much higher temperatures than alternative solutions.

https://monolith-gantry-updates.zen3d.eu/carbon-fiber-x-beam-prototype-testing/

#3dprinter #Voron #diy3dprinter

Simulated and Real World CPAP fan Comparison:

https://monolith-gantry-updates.zen3d.eu/cpap-fan-comparison-7040-vs-9290-vs-400w-ac-compressor/

The 7040 outperformed the sim by 12%, the 7575 outperformed it by 30%, while the 9290 underperformed it by 5%. This put the 7575 in the lead for peak performance. The 7040 was surprisingly the least adjustable of the group, showing the highest flow at 25%, making it less suitable for low cooling scenarios, while the 9290 showed itself capable of the widest performance range,...

#3Dprinting #Voron #3dprinter #diy3dprinter

🎥 Slow-motion videos are a powerful but underused tool for diagnosing input shaper issues.
This post highlights what becomes obvious at 240+ FPS—and why it matters for motion system design.

🔗 https://monolith-gantry-updates.zen3d.eu/slow-motion-videos-is-troubleshooting/

#3Dprinting #Voron #3dprinter #diy3dprinter

Bit of free time last night and was able to get the bed onto the #E3NG. Had to tap holes, get the arms heat inserted, then small m3 nuts into their slots, finally got it all together, and finished up with the T8/8 screws for the rods. Slowly but surely it's coming along.

#ender3ng #ender3 #ender3pro #ender #diy3dprinter #diy3dprinting #expensivehobbies #needmorehoursinaday

The Tiny-M #3dprinter a THICC Voron v0

https://makertube.net/w/qyfnsuTFMDoQr9P3Pi9NmR