Mastodawn

LAYERED 20h ago

Der heisseste Kandidat, wenn ich mir einen neuen Drucker kaufen wuerde, ist der
#Anycubic #Kobra S1 Max Combo.

Ein wirklich tolles Geraet.

#3DPrinting #3DPrinter

https://www.youtube.com/watch?v=lD1mQgqLBvs

Anycubic Kobra S1 Max Combo: Der härteste Multicolor-Test aller Zeiten

YouTube

Heri_3d 1d ago

✈️ Embraer ERJ145 1:500 - SLA 2 • STL files
➡️ Download 3D print model: https://cults3d.com/:3127538
💡 Designed by @Herisuprapto

@cults3d #scalemodel #3dprinter #aviationphotography #modelmaker

Embraer ERJ145 1:500 - SLA 2

The Embraer ERJ145 is a slender, low-wing regional jet known for its long, narrow fuselage and distinctive 1–2 seating layout. Its twin rear-mounted engines and T-tail give it a clean, streamlined profile built for efficient short- to medium-range routes. The aircraft’s crisp panel lines, pointed nose, and balanced proportions make it instantly recognizable among regional jets. ERJ 145 1/500 version with panel lines and two wings separated. And here is the previous version, https://cults3d.com/en/3d-model/architecture/embraer-erj145-1-500-sla. You can see how I printed it and its supports through this link, https://www.youtube.com/watch?v=aC8_9qfDehI, thanks for stopping by. Here’s what each label means: - FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls. - SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines. - SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.

Cults 3D

Hackaday [Unofficial]2d ago

Using a Nintendo Switch to Speed Up a 3D Printer

https://fed.brid.gy/r/https://hackaday.com/2026/05/15/using-a-nintendo-switch-to-speed-up-a-3d-printer/

Using A Nintendo Switch To Speed Up A 3D Printer

3D printers are almost never fast enough. [Cocoanix] had a Prusa MK3S with this very problem. He found it to be disappointingly tedious when completing even simple prints, and sought a way to make …

Hackaday

Erik 1d ago

Still constantly impressed with the printing performance of the Ender 3 V3 SE, for less than $200 it's gotta be one of the best bang/buck ratios in 3d printing.

For context, this section of bridging is over 50mm and it's nearly perfect.

#3dprinting #ender3 #Ender #3dprint #3dprinter

3DPrintCostCalculator 2d ago

Filament-only pricing looks fine until you scale it.

At 100 prints, small ignored costs become a real gap: electricity, wear, failure risk, and time all add up.

Are you pricing each job properly, or slowly undercharging yourself?

#3DPrinting #3DPrint #3DPrinter #Maker #GCode

Suren Gevorgyan CNC-ProfArtist 2d ago

🚽 Elegant Classic Toilet Signs (Man & Woman) • STL and OBJ files
➡️ Download 3D print model: https://cults3d.com/:4440339
💡 Designed by @GazZzaN

@cults3d #3DPrinting #3DPrinter #Printable #STLfile

biggeordiegeek 2d ago

Been working on putting together my new case for transporting my minis, the plan is to have a 2x3 case, and this is what I have done so far after about 108 hours of printing

Just got to print out the trays and pop the rolled steel on them, and probably a couple more drawers

Hopefully get the next two cube printed off next month

STLs by Txarli Factory

#Warmongers #3DPrinting #3DPrinter #CubeMod