Jan VlugCool om een #MastodonButton op de site van @DigitaleOverheid te zien!
#DigitaleSoevereiniteit #digitaleonafhankelijkheid #overheid #mastodon
aproitzUnd langsam könnte der #Tagesspiegel mal endlich einen #mastodonbutton in seinen Liveblogeinträgen aktivieren - Schwingt die Hufe !!
Paul SchoeI needed a Mastodon Social media button for my website, so I made these two.
I have no idea if I infringe on Mastodon's IP rights, but if people are looking for a button for their website, feel free to use these.
A Fediverse button would be better, but I have no idea of a design for that.
Chris Huck 
After seeing the #MastodonButton tag a few weeks ago, I was inspired to #3dprint some pins for my lunch bag to show off the different #foss tools I proudly use. So, I used Inkscape and FreeCAD to model these pins from SVGs scaled to match the pinbacks I could buy.
There are more I should make, but this seemed like a good start.
NedMan 🚀Received an awesome gift today from the amazing @evermorian
He was one of the makers that responded to my #MastodonButton challenge the other week.
Well done sir and Thank you. 😃
(Maple inlay into Purpleheart plywood. )
Ok, Ellie was getting jelly and wanted to get in on the #MastodonButton craze since she is a #dogsofmastodon
Slightly different design with Velcro backing to attach to her harness. #LaserCutting #LaserCrafting
Alice McFlurry 
I just finished making and packaging the Mastodon buttons and I’ll send them off in the mail tomorrow.
Way more than ten people responded, but I found I had enough supplies to send out to twenty people, so the first twenty to respond should all be receiving their buttons shortly.
Thank you all for giving me the confidence to do something that I initially thought was just a silly thing that only I would like, and thank you to all of the makers and creators out there who are taking this and running with it, using their own trades and tools!
Last request: I can’t control how people use this, but my hope is that nobody does this for profit. If any money is made, please donate to Mastodon and/or the owner of your server/instance.
Andrew CrawfordHere’s the 15-minute laser-cut wood inlay edition! This is pre-finished walnut hardwood inlaid with maple, since I had scraps laying around. Kerf-corrected and flipmate fit with wood glue for durability. I have a button press in the studio but, this felt more stylish. Laser-etched bottle cap for scale. Thanks to @NedMan for the short Sunday diversion.
AardvarkSagusOK, here’s my #MastodonButton. Made in Fusion 360, and relief carved on an X-Carve out of reclaimed skid wood. I don’t have much by way of paint or stain, so I’ll leave it raw. #Woodworking #Maker
https://social.makerforums.info/@NedMan/109773396686833890
https://social.makerforums.info/@NedMan/109773396686833890
NedMan 🚀 (@[email protected])
Attached: 2 images I saw on Mastodon that someone made some Mastodon buttons with their button making machine. Me: Awe, I want a Mastodon button Me: Looks over at the Laser machine 💡😁 Made from 1/8" ply and colored with alcohol makers and finished with a clear gloss spray. I propose an open challenge for all makers to make/design their own mastodon button/jewelry from their media of choice (wood, plastic, metal, paper, cross-stich, etc). Share with #MastodonButton. Boosts appeciated. #Mastodon #LaserCutting #3dprinting #woodworking #Maker #Fediverse #Button SVG file in the [link](https://forum.makerforums.info/t/mastodon-button/86988) if needed. 😀
I saw on Mastodon that someone (@Alice) made some Mastodon buttons with their button making machine.
Me: Awe, I want a Mastodon button
Me: Looks over at the Laser machine 💡😁
Made from 1/8" ply and colored with alcohol makers and finished with a clear gloss spray.
I propose an open challenge for all makers to make/design their own mastodon button/jewelry from their media of choice (wood, plastic, metal, paper, cross-stich, etc). Share with #MastodonButton. Boosts appeciated. #Mastodon #LaserCutting #3dprinting #woodworking #Maker #Fediverse #Button
SVG file in the link if needed. 😀
Mastodon Button
I saw on Mastodon that someone made some Mastodon buttons with their button making machine. Me: Awe, I want a Mastodon button Me: Looks over at the Laser machine 💡 😀 (Maker Forums has it’s own Mastodon instance just for us if you want to join in on the fun over there. I’ve met lots of great new makers 😀 ) Made from laser vector engraved and cut masked 1/8" ply, colored with alcohol makers and finished with a clear gloss spray. (svg file below ) I made a lot ...