Two Trees SK1

The Two Trees SK1 is a 3D printer that I have been using since early February 2024 and reviewed here.(...)

#3dprinting #hardware #klipper #sk1 #twotrees

https://taoofmac.com/space/com/two_trees/sk1

Enclosing the TwoTrees SK1

This weekend I took the time to assemble the enclosure for my TwoTrees SK1 CoreXY 3D printer. I had been looking forward to this for a while, but I had to wait until I had a few ho(...)

#3dprinting #enclosure #hardware #klipper #review #sk1 #twotrees

https://taoofmac.com/space/blog/2024/07/13/1900

A Review Of The Two Trees SK1

My journey into 3D printing started ten years ago with a Prusa clone I built from a kit, and has moved forward in fits and starts. Last year I decided to invest more into it, and now things have escalated yet again–for I have spent the past month testing the Two Trees SK1, a solid CoreXY machine tha(...)

#p1p #bambulab #3dprinting #corexy #review #twotrees #klipper #fluidd #makerbase #opensource #sk1

https://taoofmac.com/space/blog/2024/03/02/1900

Well, that's #3DPrinting for this month done:

https://taoofmac.com/space/blog/2024/03/02/1900

I have a feeling #BambuLab is going to be surrounded by the end of the year. Loads of #klipper printers popping up all over the place, and I've found the #twotrees #sk1 to be solid. Not perfect, but very solid.

Notes for February 12-18

It was an interesting week, with a turn away from SBCs and a return to a bit of hardware-related coding.(...)

#avalonia #moonlight #swift #imu #bananapi #quest #hardware #m7 #circuitpython #twotrees #programming #godot #sk1 #3dprinting

https://taoofmac.com/space/notes/2024/02/18/1850