Mastodawn

Anycubic Kobra 2 Pro: два дня, килограмм пластика и иллюзия экономии

«Что же ты всё по Бамбукам загоняешься? Есть и другие хорошие принтеры — и дешевле». Примерно так мне сказали, передавая на тест Anycubic Kobra 2 Pro. Ну, хорошо. Я человек открытый — дайте железо, дайте время, и я выдам честный вердикт. Kobra 2 Pro — бедслингер с заявленным полем 220×220 мм и скоростью до 300 мм/с (маркетинговые, разумеется). На бумаге — конкурент Bambu Lab A1 Mini: стол больше, ценник ниже. Казалось бы, чистая победа Кобры. Спойлер: нет. Но обо всём по порядку.

https://habr.com/ru/articles/1010950/

#Anycubic_Kobra_2_Prо #Kobra_2_Pro_прошивка #кастомная_прошивка_3D #Fluidd #Mainsail #bed_mesh #Klipper #3D_печать #FFF

Anycubic Kobra 2 Pro: два дня, килограмм пластика и иллюзия экономии

Хабр

Natanox 🇺🇦🇵🇸Mar 10

Is there no way to attach and read a voltage sensor with Klipper? 🤔 This would be really useful…
If course I could attach them directly to the SBC, but I can't find any way to display that input as voltage in Fluidd either.
#3DPrinting #Klipper #Fluidd

LeonianUniverse😁Apr 28, 2025

I still wish I could get #OctoPrint to work with the #Q1Pro, but it doesn't seem like its going to happen any time soon which sucks because OctoPrint is way more accessible for the #Blind than #Fluidd.

Pedro Lamas Apr 2, 2025

As I'm currently unemployed and looking for a new job, I have some (forced) free time to go through some #opensource contributions on #Klipper, #Moonraker, #Fluidd, Microsoft #PowerToys, etc...

Pedro Lamas Feb 8, 2025

Fluidd 1.32.1 is out, with active printer bookmarkable URLs, direct control of printer power via Moonraker, Kalico's firmware retraction z-hop support, and lots of other improvements and bug fixes!

#Fluidd #Klipper #3DPrinting #3DPrinter

Pedro Lamas Dec 31, 2024

Fluidd 1.31.4 is out, introduces Kalico and Danger Klipper support all around, Beacon profiles support, Nevermore Controller support, #region...#endregion folding support in the config files editor, and whole bunch of other improvements and bug fixes!

#Fluidd #Klipper #3DPrinting #3DPrinter

GeekProjects News Sep 4, 2024

3D Printering: Switch and Klip(per) https://hackaday.com/2024/09/04/3d-printering-switch-and-klipper/ #HackadayColumns #3dPrinterhacks #microstepping #3dprinting #Moonraker #klipper #Fluidd #g-code

3D Printering: Switch And Klip(per)

Last time I tried to convince you that, if you haven’t already, you should try running your 3D printer with Klipper. There are several ways to actually make it work. The first thing you need …

Hackaday

Pedro Lamas May 15, 2024

ICYM, Fluidd 1.30.0 is out, introducing keyboard shortcuts, WebRTC (MediaMTX) camera support, SHT3X sensor and Nevermore Controller support, the ability to backup and restore the Fluidd settings, and a few more improvements and bug fixes!

#Fluidd #Klipper #3DPrinting #3DPrinter

Show thread

Pedro Lamas Apr 17, 2024

Second, I was having really bad 2nd layers for no apparent reason... thinking it was me just hitting the max flow rate of the Revo 0.4 nozzle, I ordered a new Revo High Flow 0.4 which arrived this morning... my surprise was when I removed the old one and it was "blue", which means... 0.6! 🤦‍♂️

#Voron #LDOMotors #Fluidd #Klipper #3DPrinting #3DPrinter

Show thread

Pedro Lamas Apr 17, 2024

First, it took me a few prints until I realized there was a protective film on the smooth PEI side of the build plate that we are supposed to remove... 🤦‍♂️

#Voron #LDOMotors #Fluidd #Klipper #3DPrinting #3DPrinter