#RabbitHole: @okias is doing a lot work to mainstream #sdm845 patches to the #linux kernel. During a meeting of Phosh.mobi e.V. members I learned that there seem to be not many testers for #Shift6mq #axolotl. I still had a broken Axolotl sitting on my desk…

• repaired the phone that originally had been bought as part of a #ShiftPhone8 deal
  • cleaning inside (residue from water contact)
  • new display (two lines of broken pixels)
  • new usb-c pcb (didn't charge, data broke during testing)
• learned about edl to recover if phone wouldn't boot to fastboot anymore (yes, really had that situation later 😉)
• learned about the difference of fastboot and fastbootd mode
• learned about u-boot and the boot chain on the phone
• learned about dynamic partitions used in Android and how to use them from #linux
• learned about pmbootstrap
  • to build my own device images (mixture of existing axolotl and sdm845 to be compatible to the phone and the usage with u-boot and dynamic partitions)
  • changed pmbootstrap to build small (92M) boot image for boot_a/b partition
• tried to get more space for out of the phone for boot & root than provided by boot_a/b and system_a/b
  • resized userdata of Android
  • created two additional partitions for postmarketOS
• learned how to recover from kernel not booting without re-flashing
  • u-boot usb mass storage mode exports the mass storage of the phone over usb-c
  • phone connected to an aarch64 system (#Librem5 running #Mobian)
  • mounting encrypted partition, boot and what-else is needed
  • installing kernel packages via apk while in chroot on Librem5
• learned how to compile a kernel using ./envkernel.sh and pmbootstrap

Now I'm quite sure I can recover from any failure I will encounter while testing sdm845 kernels and I have the following setup on my Shift6mq:

• ShiftOS-L with small userdata partition in slot_b
  • applications for demoing the phone installed
  • work profile to contain closed source applications
• postmarketOS edge installed on partitions behind userdata
  • u-boot on rescue_a
  • 1GB pmOS_boot
  • 60GB pmOS_root
  • applications for demoing
  • multi-user: my testing user, demo user
  • everything except cameras work
• dual-boot possible on-the-go: enter fastboot (by holding vol-up at start), change slot, reboot

I put my notes on the postmarketOS wiki.

I started two merge requests:

• support audio configuration when started through u-boot in alsa
• add support for booting using u-boot and dynamic partitions to axolotl

I'll carry the phone at #clt2026 - Chemnitzer Linux Tage 2026 - on saturday 28th this month. I'll mostly be around the "Linux on Mobile" booth.

Broken #shift6mq #postmarketos phone - oops I did it again...

Be very careful with #qbootctl because it can brick your phone.

https://www.janwagemakers.be/jekyll/postmarketos/shift/2026/01/24/broken_shift6mq.html

https://github.com/linux-msm/qbootctl/issues/4

#Phosh and Phoc had nightlight support since ages but the only phone with out of the box gamma LUT support that could make use of it so far was the #PinePhone.

Thanks to @fizzo 's kernel work it works on Qualcomm based phones too now and makes the (optional) night light quick toggle useful on way more devices and looking at the bright AMOLED displays at night much more pleasant.

Demo below is on a #SHIFT6mq.

#LinuxMobile #wlroots

I've broken my #shift6mq #shiftphone dual boot #postmarketOS - #android setup. I'm stuck in a "fastboot mode" boot screen. So far I'm unable to fix the problem. Anyone suggestions?

More info at https://www.janwagemakers.be/jekyll/postmarketos/sxmo/mutt/2025/08/04/broken_shift6mq.html