Yay! 🥳

I just made my #TTGO #VGA32 use the #esp32forth variant with #fabgl enabled (a.k.a. #ESP32forthStation ) *and* properly recognize the onboard #sdcard !!

In the end the modification was quite simple, I had to tell the TTGO VGA32 the proper SPI pin configuration for the sd card via SPI.begin() and added that code to the SD.begin word definition.

By default, SD.begin would use the #esp32 default SPI pin configuration which is not being used on the TTGO VGA32 (see TTGO VGA32 pinout).

EDIT: but it took me hours to realize that I used a video resolution which consumed too much memory, causing each attempt to do a "SD.begin" in ESP32forth to fail ... lowering the resolution to 640x200@60 did do the trick! 😎

Time to go to bed ... 🥱

#Arduino
#Forth

As some did request:
A #Binary version of #RunCPM v6.7
for the #TTGO #VGA32
from the last Sourcecode version GL20250131 .0
is now available at
https://github.com/guidol70/RunCPM_VGA32/raw/refs/heads/main/v6_7/GL20250131_RunCPM_v6_7_VGA32_Binary.zip
CP/M v2.2 via UART1 (on UEXT1) running on #Olimex #Agon Light 2 via an external #TTGO #VGA32 #FabGL Terminal at 115.200Baud
UART1 has been configured to 115200/8N1 via
zinc-setup

Wir sind heute mit dem Fahrrad zum Geburtstagskaffee nach Siegburg gefahren. Begleitet hat uns ein #paxcounter auf #ttgo Basis.

Es ist erstaunlich, wie gut die Abdeckung in #lorawan inzwischen ist. Als #freifunkrheinsieg (FFRS) sind wir seit Jahren dabei, dass LoRaWAN #gateway Netz in der Region Rhein-Sieg aktiv auszubauen.

Vier der erkennbaren Gateways sind von uns, vom #ffrs.

#freifunk
#digitaleteilhabe
#buergernetzwerke
#internetofthings
#ttnmapper
#thethingsnetwork
#ttn
#iot

Added a quick Meshtastic node at the OH2TI radio club with some donated Lilygo TTGO boards.

#Meshtastic #PRK #OH2TI #TTGO #LoRa

Small RamLoad-fix Update for #RunCPM v6.7
on the #TTGO #VGA32 for using other CCPs
as the Internal v3.1
And not using GPIO32 anymore as HDD-LED, because its a Pin from the PS/2-Keyboard
Get the source at https://github.com/guidol70/RunCPM_VGA32/raw/refs/heads/main/v6_7/GL20250131_RunCPM_v6_7_VGA32.zip
#RunCPM on #Pico2 TTL-serial GPIO 0-TX/1-RX
connected to a #TTGO #VGA32 as Terminal 😉
(GLTerm a #FabGL ANSI-Terminal-Fork)