M4xI need to share that tree support is absolutely amazing! I've recently switched from #simplify3d to #orcaslicer and don't know how I could live without this support style for so long 😅
LED Patrick🚥Does anyone know a #slicer that does multi processing on a model besides #Simplify3D? Like starting with normal infill and then switching to vase mode and back again?
I actually consider buying a S3D license for this feature.
Mark FraserBuilder Extreme claim that the slicer #Simplify3D is open source on their website https://builder3dprinters.com/product/builder-extreme-1000/#1481550558332-c4faffe7-0870. Can't find anywhere else that says this. #3dprinting
FozzTexx@fskornia Checked reducing the infill percentage from 10% to 5% and it said it would only save 5 minutes. With infill at 5% it usually makes the top full of holes, but I suppose for this it probably wouldn't matter. I've never tried increasing layer height. I use #Simplify3D and it has no way to save profiles *or* print settings so I usually try to avoid messing with them. (Learned the hard way too many times.) Actually I guess that's wrong. It can save them but it has no way to load them.
Geert BevinStraight from the 3D printer, spent a while creating my own final layer ironing procedure in Simplify3D 5. The results are now super smooth with virtually no layer lines!
The firmware and #slicer are definitely 1.0 releases, you can feel it, but for a first entry it very functional and impressive. I already switched over to using #Simplify3D v5 instead, which works fine. Just the gimmicky AI feature is disabled because there are no reference images generated for the camera to compare with during the print.
Oh wow, looks like Simplify3D v5 is finally available!
https://www.simplify3d.com/products/simplify3d-software/whats-new/version-5-0/
JaumeLis ha costat 5 versions als del #simplify3d ficar una vista ortogràfica a la seva app, mare de deu senyor 😅
Bas van ReeuwijkOne of my favorite #3dprinted parts. The Porcupine cocktail stick holder. #giftideas
Unfortunately I don't have enough sticks to fully populate it.
I really love the new variable layer height setting in Simplify 3D 5.0
#cetus3d #simplify3d
Unfortunately I don't have enough sticks to fully populate it.
I really love the new variable layer height setting in Simplify 3D 5.0
#cetus3d #simplify3d
PicaboubxSi vous êtes vieux/vieilles en #impression3d vous connaissez #simplify3D
Ce #slicer avait disparu de la surface du globe puis bientôt 3 ans avec ses promesses de mise à jour jamais tenu de la V 4.1.1 à la V 5
Pour rappel, la licence coutait 149€ (à vie !! si mes neurones ne me jouent pas des tours).
Depuis les #Slicers comme #Cura, #PrusaSlicer, #SuperSlicer ou #IdeaMaker se sont fait une place et ont fait évoluer l'#impression3D
Et bien voila la V5 de #Simplify3D et elle est re-payante 🤮
