W.A. Production launches ChopBeast 2 audio chop & remix plugin

ChopBeast 2 features new innovations inspired by community feedback, providing a seamless workflow for creative slicing.

Rekkerd.org
Initial Audio updates SourceLab to v1.6 incl. SFZ support

The update adds professional multi-sample support, a polished interface, and bugs have been squashed to keep your creativity flowing.

Rekkerd.org

Hay una cosa que me acabo de dar cuenta y no deja de molestarme.

Uno de los 'mentores' de Kay Vess es una experta en entrar en sistemas informáticos de Star Wars (aquí es todo HW, pero bueno) y en las misiones y tal no dejan de llamarla 'hacker'.

Es lo suyo, pero el problema es que los 'hackers' en Star Wars se llaman 'SLICERS', porque 'cortan' a través de los cifrados y protecciones.

entiendo el por qué de una decisión así, pero hubiera dejado el término con el que los fanses de SW están familiarizados, por ayudar al worldbuilding... pero que sabré yo?

#StarWars #StarWarsOutlaws #JAKER #Slicer #LasCosasPorSuNombre #NoSonRobotsSonDroides #NoSonMagosSonJedis

#preFlight is a new open source slicer by oozeBot based on #PrusaSlicer but with deep rework of its internal code.
- Truely 64bit
- GCode processing in memory
- Athena perimeter generator improving over Arachne
- Interlocking perimeters similar to brick layers
- Deeper #RRF integration
- . . .

GitHub: https://github.com/oozebot/preFlight

Feature list:
https://github.com/oozebot/preFlight?tab=readme-ov-file#exclusive-features

Feature Showcase:
https://github.com/oozebot/preFlight/discussions/categories/preflight-features

---

Source via @fabbaloo : https://www.fabbaloo.com/news/oozebot-launches-preflight-slicer-rebuilding-prusaslicer-on-a-modern-64-bit-architecture

#3dprinting #slicer

Changing Print Layer Patterns To Increase Strength

Dy default, the slicing software used for 3D printers has the printer first create the walls around the edges of a print, then goes back to deposit the infill pattern. [NeedItMakeIt], however, expe…

Hackaday
I had a couple of failed print today. It's an 8 hour print, so it's a waste (of filament, electricity and time...). The first time I removed the part from the plate, but the second time I decided to try to resume it. (Continues...)

#3dprinting #3dprinter #slicer #failedprint