2/3
Had planned to fit it in a real fish can,
but decided would be better, and simpler, to print the can too and make it bigger.
After some refinement in blender, I printed it on My A1 mini.
(had a few problems on the guitar supports)
I fit tested the parts
Then sanded, repared, replaced parts, broked parts, moaning, re-repaired, re-sanded...
it is made of 5 part :
-Fish can base
-can lid
-6 monsters
-crab clamp with keyboard
-crab leg
I finally wet sanded a bunch of #3DPrints that I had sitting around. Most of them were bases or toppers which I'm quite excited to get some paint on!
I also primed a bunch of printed models since the humidity wasn't 800% today! Now I've got 3298473785 things to paint! ๐จ
#resin #3DPrinting #sanding #3DPrinter #painting #miniatures #GrimDark
#making #maker #diy #repairing #HomeImprovement #sanding
So much my "making" is just sanding things.
Stop whining and go up a grit.
Ok.
I am almost finished with wet sanding the last side of the last glider wing.
The orbital sander has done all it can do on the mostly flat top and bottom of the wing, but the leading edge is strongly curved.
I'll sand that narrow strip by hand...tomorrow when I'm not tired.
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Paint #Sanding #Polishing #Wing
I must be making good progress wet sanding the glider's wing.
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Paint #Sanding #Polishing #Mess
The final (2nd) glider wing is getting sanded to remove orange peel from the polyurethane topcoat.
After sanding is complete, I'll buff it with rubbing compound to give it a semi-mirror finish.
Tomorrow I hope to finish sanding this top side. (The bottom remains unsanded.)
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Paint #Sanding #Polishing
Two black Sharpie lines will show my progress of gentle hand sanding of the glider wing's leading edge. This will be to remove the orange peel texture.
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Wing #Sanding #Paint #Painting #Sharpie
The underside of the glider's right wing is ready for sanding to remove orange peel from the final coat of paint.
(Now I know how long of a line a Sharpie can draw before it runs out of ink)
The three oval areas are inspection/access ports to the inner moving parts of the flight control system...flaperons, and spoilers.
The grid of black lines will help me monitor the progress of sanding.
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Wing #Sanding #Paint #Painting #Sharpie
Learn about the best Dremel models, compatible attachments and accessories. The tool is great for cutting, sanding, engraving and polishing.
Nael
Jimmy B. 
Mikko
TomKrajci ๐บ๐ฆ ๐ณ๏ธโ๐ ๐ณ๏ธโโง๏ธ
piafosaure
TinkerVault