Work safety is always an important topic in a workshop, but especially in an open workshop with many non-professionals. We are happy about a motivated member improving things practically, from better safety goggles, new table saw push blocks, info material and safety course.

#workshopsafety #tablesaw #safetytraining
#hackerspace #makerspace #openworkshop #MunichMakerLab #MuMaLab #Kreativquartier #Kreativlabor #DIYMunich

New floor for the small #tractor #trailer. Found some old boards stacked in one of the barns, then made made a 3m long jig for sending them through the table saw from two pieces of door architrave and some scraps.

Cutouts where the frame had reinforcements welded in and voila, new floor. I'll add braces when I've redone the frame.

Also a wheelbarrow of scraps for the following hot shower (well, tub of warm water to pour over the head).

#DIY #Homestead #Woodworking #TableSaw

Argh!

Didn't think this through 100%...

The grey section of the table saw is not magnetic 😬.

Now what? I matter be reduced to actually useing some kind of fixings and drilling holes...#woodworking #tablesaw

So, in order to get around the problem of not having standard sized tracks on the top. I'm going to use a sheet of 3mm ply I've got lying around.

As I don't want to drill holes for fixing it to the top, I'm goingto drill small holes to sink 2mm x 5mm neodymium magnets (which i also have lying around), these should stop the sheet from moving or sliding off.

#tablesaw #EvolutionRage5S
#Woodworking

Been meaning to post my latest tool and one of the last few I really needed. Picked up Laguna’s F2 during Father’s Day. I can only hack certain cuts so many ways before you really itch horribly for a table saw. Wanted sawstops pcs but they raised costs again and it’s really just out of reach.

So far it’s been a workhorse. Built some jigs and a sled. Working on a memorial flag box now.

#woodworking #tablesaw #lagunaf2

"A few days after watching Jonathan Katz-Moses' introduction of his absolutely game-changing cross-cut sled fence jig, I woke up from anxious dreams and had the idea for this partially disposable 3D-printed system." (Also, I wanted to use the word "butt" as a verb as many times as possible.) #Woodworking #3Dprint #crosscut #tablesaw #tischkreissäge #schiebeschlitten

https://www.printables.com/model/850387-cross-cut-sled-rails-and-fence-jig