The Kingroon KP3S Pro (V1), Two Years Later

It’s been two years now since I got myself one of the first iterations of the Kingroon KP3S Pro, so I thought I’d post a sort of cursory long-term review of what it’s been like to (...)

#3dprinting #kingroon #klipper #kp3s #longterm #review

https://taoofmac.com/space/reviews/2025/04/30/1930

So, um, I bought a #kp3s on sale and... made some changes.

I also modified #marlin for bits and pieces here and there. My printer has GD32F303 and the printer is more stable in mks_robin_nano_v1v2 environment.

Here's my config -- https://github.com/avolkov/dolly-marlin/blob/master/marlin-2.1.2.1/kp3s-stock/platformio.ini

I haven't configured probe yet, just installed it. This is 6-30V probe, so I'll need to make a voltage divider before I can connect it. I'm just going to replace Z endstop with the probe.

I will eventually write blog about it. #3dprinting

Upgrading the KP3S Pro (V1) to Klipper

It’s been nearly a year since I ordered the KP3S Pro, and a slight twinge of shame finally got me to pull the trigger, upgrade it to Klipper and install the probe that I ordered with it over Summer break.(...)

#klipper #kp3s #bltouch #3dprinting #superslicer #kingroon #3dtouch #kp3spro

https://taoofmac.com/space/blog/2023/09/16/2000

Today's #3DPrinting project consists of testing thread inserts for the first time. Very satisfying seeing them melt right into the plastic...

This is a fun little part that should help me gain 10-15-ish mm of Z-axis height for my #Kingroon #KP3S Pro. Don't really need it, but this is one of those "because I (think I) can" things...

Doing some research on #klipper touchscreen support. Apparently the #marlin work for the #kp3s LCD wasn’t ported over, so no on-device control…

#3DPrinting

Just made public my #openscad #spoolholder #design for the #kingroon #kp3s Pro. Happy #3dprinting

https://github.com/rcarmo/openscad-kp3spro-filler

After three months of use and multiple prints and tweaks, here’s my #review of the #kingroon #KP3S #pro

https://taoofmac.com/space/blog/2023/01/22/1700

#3dprinting #hardware #modding