$19.90 XIAO Debug Mate ESP32-S3-based 3-in-1 multi-tool acts as a DAPLink debugger, serial monitor, and/or power profiler

https://web.brid.gy/r/https://www.cnx-software.com/2025/11/27/19-90-xiao-debug-mate-esp32-s3-based-3-in-1-multi-tool-acts-as-a-daplink-debugger-serial-monitor-and-or-power-profiler/

We (SCI Semiconductor) are about to hire some folks in the next couple of months (probably starting in January, since we're about to hit Christmas):

We're aiming to hire 1-3 FAEs, who can build out the open-source bits of the #CHERIoT software stack (including drivers / various communication stacks), build demos, and work with customers on use-case bringup.

We also want to hire someone else on the toolchain side. Primarily #LLDB + #OpenOCD, but also working with our #LLVM (and #RustC) folks.

Let me know if you're interested!

EDIT: We are a full-remote company. It's easiest for us to hire people in the UK (and one of our investors would really like us to hire more people in Sheffield), but elsewhere is possible (though might, for tax purposes, require you to be officially a contractor for a while).

We're also going to be hiring people for our hardware verification and RTL teams soon (more on the verification side than design at the moment, I think). I'm not responsible for them, but I can find out more details if anyone is interested. Our first CHERIoT chip is nearly finished, we're starting to work on the second.

EDIT 2: Thanks to all of the people who have expressed interest (in public and private posts). I'll try to get back to you all next week!

EDIT 3: I hope I've replied to everyone now! If I missed you (there were more replies than I expected!) please let me know. I think we'll aim to do another hiring round over the summer next year, so if the current timeline doesn't work out for you, please still let me know and I'll keep you in mind next time!

#GetFediHired

Had anyone here attempted to #debug their Espressif #ESP32 using #OpenOCD + #GDB and may provide me some assistance? Trying to get things working with my #Glasgow Interface Explorer on my little #Arduino test sketch:

https://github.com/espressif/openocd-esp32/issues/384

nRF52833 + nRF5 SDK +
VSCode + OpenOCD + DAPLink(IN11)
조합으로 세팅하는 방법

#IN11 #DAPLink
#OpenOCD

https://chatgpt.com/s/t_68c287e92fa48191a14be12f547b0243

Grr. ok with openocd I can probe the NAND over jtag, and see the info....

> nand probe 0
NAND flash device 'NAND 256MiB 3.3V 8-bit (Hynix)' found

> nand info 0 0 1
#0: NAND 256MiB 3.3V 8-bit (Hynix) pagesize: 2048, buswidth: 8, erasesize: 131072
#0: 0x00000000 (128kB) erase state unknown (block condition unknown)
#1: 0x00020000 (128kB) erase state unknown (block condition unknown)

but I can't read/dump. ☹️
> nand dump 0 test.dump 0x20000 0x800
reading NAND flash page failed

Not sure what could be wrong/need changing. 😡 This is driving me mad, although I'm not an openocd expert to know why the info would work but read not.

#openocd #debugging #hacking #jtag

Прошивка К1921ВГ015 без IDE и JTAG программатора

Итак, передо мной лежала полностью собранная плата и время стремилось к вечеру. Руки чесались хотя бы помигать светодиодом, а руководство было вскользь прочитано уже несколько раз, но тут меня осенило - у меня нет подходящего программатора!

https://habr.com/ru/articles/933670/

#к1921вг015 #нииэт #jtag #bluepill #stm32f103 #openocd

Programming ATF1508 CPLDs using Altera Quartus II, a bunch of other tools and the Adafruit FT232H Breakout

https://www.steckschwein.de/post/2025/07/cpld-upgrade-new-toolchain/

#vhdl #cpld #atf1508 #altera #openocd #retrocomputing

Настройка ToolChain-а Cборки Прошивок для MIK32 (MIK32 + C+ GCC + GNU Make + OpenOCD)

В этом тексте я написал про то, как настроить рабочее окружение для разработки для российского микроконтроллера MIK32 ( K1948BK018 ).

https://habr.com/ru/articles/854050/

#MIK32 #K1948BK018 #STARTMIK32V1 #CH552T #АМУР #mikron #openocd #RV32IMC #SCR1 #eclipse

VSCode, SourceCraft Code Assistant и микроконтроллеры

Сегодня разработка прошивок для микроконтроллеров обычно требует заметно больше времени и ресурсов, чем создание собственно схемы и платы. Со времён ковида прошли времена безраздельного владычества STM32, и теперь регулярно приходится осваивать новые железки. При этом для них зачастую приходится ваять программный инструментарий и библиотеки — поскольку предоставленное производителем обычно неудобно. В этой статье я расскажу, как использовать VSCode для разработки прошивок под разные архитектуры и как мне в этом помогает SourceCraft Code Assistant от Яндекса.

https://habr.com/ru/companies/yandex/articles/892502/

#vscode #stm32 #gd32 #verilog #ai #makefile #stlink #openocd #c++ #инструкция