Show threadmorganJun 14, 2024
building libtrellis on an #rpi3b hanging at 68% overnight, so no building the gateway onboard I guess, not sure it would have help any anyhow.
KernicMay 11, 2024

Heute irgendwie viel rumgebastelt. #OBS neu eingestellt und neues Overlay gebastelt. #PSVita als USB-Webcam eingerichtet. Ohne Erfolg versucht herauszufinden, warum mein #Klipper / #Mainsail #rpi3b+ nicht bootet.

FΓΌr letzteres kopiere ich gerade alles auf eine neue SD Karte, in der Hoffnung, dass nur die Karte und nicht der #raspberry hinΓΌber ist.

Ah, und #albiononline habe ich noch gespielt.

JaKAug 27, 2023
@herrbischoff @BastilleBSD I found #bastilleBSD in my roaming through my searches on the internet ;-) but great advise! Have you any experience? Would it run on a #rpi3B+ ? I understood it relies on #zfs , so im wonder if I have enough CPU power πŸ˜…
de VK5ZSH πŸ‡¦πŸ‡Ί 🐧 πŸ³οΈβ€πŸŒˆJul 21, 2023

My Duplex #MMDVM on a #RPi3B+ setup, just waiting for #W0CHP PiStar Dash to do it thing so I can connect to it and configure it

#hamradio #digital #DMR

AG7GM DanApr 1, 2023
The story so far: Rpi3 in a box, #HamClock SD card installed and configured. Need to fasten it to the display, wire it, and consider how to power it.
---
RT @DanLDEon
The generosity of strangers blows me away. Thank you (and hats off) to the person that gifted me a #Rpi3B so I can gift a #HamClock to a friend. https://t.co/AoanOKCd7o
https://twitter.com/DanLDEon/status/1641220708855615488
Dan D'Eon AG7GM on Twitter

β€œThe generosity of strangers blows me away. Thank you (and hats off) to the person that gifted me a #Rpi3B so I can gift a #HamClock to a friend.”

Twitter
AG7GM DanMar 29, 2023
The generosity of strangers blows me away. Thank you (and hats off) to the person that gifted me a #Rpi3B so I can gift a #HamClock to a friend.
de VK5ZSH πŸ‡¦πŸ‡Ί 🐧 πŸ³οΈβ€πŸŒˆDec 27, 2022

Well it works for the most part. #ASL installed on 8GB sdcard on a #RPi3B+. Now I want more punishments so I have imaged a 16GB sdcard with #DVSwitch beta 202208 that includes ASL Lite.

#hamradio #linux

de VK5ZSH πŸ‡¦πŸ‡Ί 🐧 πŸ³οΈβ€πŸŒˆDec 24, 2022

Well I have been putting all this together to take over the roll of what current #RPi3B+ so to that can be used with #AllStar node.

The only way could get #RPi4B was buying it in a kit, but turns out the #ArgonOne is rather nice case with expansion board. It will take over and have a pressure breakout connected to the GPIO and a USB #RTLSDR dongle attached to receive data via #RTL_433 from the WX outdoor unit.

ThomasFeb 21, 2020

Tried to install #ipfire on a #RPi3B: I am too dumb to use #serial #console and have no monitor and keyboard available for graphical installer. All manuals and howto refer to graphical installer.

Dafuq is this sh!t?

Everything out there can be used with #ssh ffs!