First light (print)!
Ok, and the second one too. I couldn't resist a bright orange benchy!
The gcode was generated with a hot end temperature of 230C which I think is about 15C too hot for this filament. I've done filament warping tests before and too-high hot end temperature will cause print warping like is seen in this benchy.
It's another #FreeCADFriday and I share another printable design created with @freecad!
I made magnetic tags to label the printer configuration. This is an easy way to prevent material or nozzle size mixups.
I place them where they are visible through the camera so that they can be seen via #OctoPrint.
#prusa #prusacoreone #3dprinting
It's alive! It's alive!
Собирал около 15 часов. Фух. Я устал. Но я очень доволен.
I made a magnetic enclosure for an ESP32-CAM to monitor my 3D printer.
I call it Matey Cam, akin to Prusa's Buddy Cam.
Am Core One+ hab ich eine finale Lösung für das Säubern der Nozzle über eine Silicon Bürste angebracht: die normalen Halter passten nicht weil die BIQU Cryogrip Glacier vorn einen überstehenden Rand hat 😌
Dann war die linke Seite schlecht weil da der Druckkopf mit dem Mechanismus zum Öffnen des Lüftungsgitter kollidiert 😳
Ein bisschen start GCode und es funktioniert 🥳
https://www.printables.com/model/1418581-cryogrip-compatible-core-one-nozzle-wiper-arm
@FreeCAD I have uploaded my filament storage/dry box project. 🙌
You can find it here:
https://www.printables.com/model/1587660-filament-dry-box-from-food-storage-container
Additionally, here is the customized side handle for Prusa CORE One that is also visible on the photo.
https://www.printables.com/model/1587685-side-handle-for-pc4-m6-pneumatic-coupler-for-prusa
#FreeCAD #FreeCADFriday #3DPrinting #3DPrint #DIY #Prusa #PrusaCoreOne
Dustin
Tinx
Base48 hackerspace Brno
Обувь Стадлова
coding-lemur