Mastodawn

karibu 6h ago

La streameuse Ultia exclue du jury du CNC après des propos dans un live

https://vid.freedif.org/w/vqEta2wTUtKXnUZeXt7tFZ

La streameuse Ultia exclue du jury du CNC après des propos dans un live

PeerTube

MakerSpace Haagse Hout 2d ago

Looking upclose at art! #makerspace #cnc #3dobject #3dsoftware #plywood #fablab

MakerSpace Haagse Hout 2d ago

Here is an update on an art project we are doing. Things are starting to look like something! Just needs some LED's and some colour. #cnc #plywood #makerspace #fablab #artobject #3ddesign #3DSoftware

Show thread

emily, blinkenlight witch 2d ago

so that's *most* of the holes in this part done. still need to attach the Z ballscrew and servo bracket to it

the spindle mounts on a plate that will also have the rails for these bearing blocks, so they don't need to extend down any further than the current z position

(there are two more bearing blocks that go down there but I haven't put them on yet because they cover the screw holes for the other bearing blocks. dependency chains!)

#cnc #theWorkshop

Munich Maker Lab e.V.3d ago

Goodbye DIY CNC!

This DIY CNC has been with us for years, but it turned out to be too tricky and hard to use, so it wasn't used much. We've now sold it to another maker and will free up the space to reorganize the workshop.

Next, we'll bring in a different CNC from a member – less DIY and more practical for many people.

#hackerspace #makerspace #openworkshop #MunichMakerLab #MuMaLab #Kreativquartier #Kreativlabor #DIYMunich #CNC #workshopupgrade #communitymakerspace

concretedog 4d ago

Happy as a pig in muck as they say... in the #doghouse early this morning. Tunes on (some 90's DnB cos I'm that old!) and wiring up a LinuxCNC control setup with a raspberry pi 5. For an upcoming @rpimag article. #CNC #making

Woodinsider 5d ago

Pravidelná várka zajímavostí o dřevě
https://academy.woodinsider.cz/o-dreve-89/

#oDreve #woodinsider #wood #woodwork #woodworking #woodworkingprojects #CNC #diy #design #newsletter

O dřevě #89

Přístavba Islington House ~ Chatky Kraví hora ~ Z kanceláře do rezidence ~ Na břehu jezera ~ Kolekce nábytku

Woodinsider

Martin Meng | Forschungszulage 5d ago

Maschinenbauer: CNC-Optimierung, additive Fertigung und neue Werkstoffe sind foerderfaehige FuE.
https://martinmeng.de/forschungszulage
#Maschinenbau #CNC #FZulG

Forschungszulage 2026: Der vollständige Leitfaden für Selbständige | Martin Meng

Alles zur Forschungszulage (FZulG) für Einzelunternehmer, Freelancer und Personengesellschaften. Voraussetzungen, Förderhöhe, Antragsprozess. Jetzt Fördercheck starten.

Martin Meng