Leo BistmansI am looking for slot aerial designs in metric sizes.
Some stl files for a cnc would be even better.
de on1aad
Jake AverillYesterday's #SOTA activation - Moel y Gamelin.
I tried out the new tripod idea for the antenna mast. It needs a guy line or two, which should be sorted for next time.
It was very cold and windy, so I didn't take many pictures at all. 9 QSOs on 23cms though, which was very good!
In time, when we get warmer and more pleasant weather, I fully intend on making videos of my experiences using the Icom IC-905 for SOTA and other portable operations. #AmateurRadio #HamRadio #IC905 #23CM #Microwave
°Thomas° - DO1AYJIs the IC-905 an ideal SOTA radio? No. But you can absolutely do a #SOTA activation with one, and I'll do it again. Many times. This was the summit of Penycloddiau today (GW/NW-054). Wx snowy but not much wind, so it wasn't too bad. Thanks to my good friend @DafyddJack and 4-legged companion for the company #AmateurRadio #HamRadio #Portable #icom #2m #23cm #SSB #VHF #UHF
Soo, bin wieder #qrv auf #23cm , #70cm und #2meter . Kabel und Stecker neu, Anpassung der zwei Meter yagi erneuert. Der Mast ist an einem anderen Standort und kann jetzt von einer Person umgelegt werden.
#hamradio #vhf #uhf #dx
#amaterufunk #eigenbau
#hamradio #vhf #uhf #dx
#amaterufunk #eigenbau
ftg
Last week, I activated the #SOTA summit of Moel Gyw. This time I was going to give #23cm a proper go and I could see a few others had similar plans.
Armed with my FT-857, SG-Lab transverter, loads of suncream and no idea on how I was going to connect and mount the gear when I got there, I set off.
Parking was a pain, and it took some trial and error at the top, but I made 9 QSOs on 23cm with the PCB antenna and 2w! After that, I moved to #2m which was good fun as usual. #HamRadio #AmateurRadio
Armed with my FT-857, SG-Lab transverter, loads of suncream and no idea on how I was going to connect and mount the gear when I got there, I set off.
Parking was a pain, and it took some trial and error at the top, but I made 9 QSOs on 23cm with the PCB antenna and 2w! After that, I moved to #2m which was good fun as usual. #HamRadio #AmateurRadio
The radio used in this link is/was an Icom IC-12GAT.
1Watt, 1240-1300 MHz.
