A common hurdle for developers using the KT148A voice chip: one-wire serial communication. If you're debugging with no success, especially with a CH571F MCU, don't blame the controller.

The solution often lies in two areas:
1. Confirm the chip isn't in download mode (Pin 5 low at power-on).
2. Strictly adhere to the timing pulse widths in the datasheet.

This is a firmware-centric fix.

#Embedded #Electronics #Firmware #Debugging #KT148A #OneWire #CH571F #Maker

https://www.linkedin.com/pulse/kt148a-faq-collectionhave-you-implemented-one-wire-serial-tsui-slcpc

Maybe there are decent uses for the "#OneWire" but with notebook PCs it's just adding another part that can break, yet another "planned obsolescence" strategy that also helps lock people into a certain brand's AC adaptors or ink or whatever. Two used Panasonic CF-MX5 PCs after a year or so won't take power though they came with Panasonic power cords.. Switching cords fixed one somehow but it's un-needed aggravation for stupid policy!? Yet Another Example of the #InvisibleFoot ?
https://project-insanity.org/2020/05/25/hardware-fix-for-dell-ac-power-adapter-could-not-be-determined/
https://www.monodeasobu.com/entry/2021/08/09/195452
https://takabus.com/tips/2045/

Ist doch ganz nett geworden. Kleines Shield zum Anschluss von bis zu sechs OneWire Temperatur-Sensoren.

#esp8266 #onewire #espeasy #ds18b20

I finally managed to finish my sensor-hub #PCB for #esphome. It is connected to 230V mains power and has an #ESP32 for processing and #WIFI communication.
There is one #modbus module, 9 S0-Pulse-meters and 3 #onewire temperature sensors connected to it.

#homeassistant

#RFID #Hitag 125KHz / #Mifare 13,56 MHz #ONEWIRE iButton - Universal Schaltinterface mit #ESP32 - Hardware Version 1.0 - nun geht es mal um das bauen eines #Musters zum erstellen der Software - diese kann dann für die unterschiedlichen Leser Typen freigeschaltet werden.

Das #Balkonkraftwerk nimmt weitere Formen an: Die Brauchwasserwärmepumpe ist nun so programmiert, dass sie immer dann anspringt, wenn genügend Leistung vom Wechselrichter kommt. Das ist im Sommer eigentlich fast jeden Tag der Fall. Nur wenn nicht und die Temperatur im Kessel zu gering ist, schaltet der #raspberry noch automatisch auf Gasbetrieb um.

#fhem #diy #onewire #brauchwasserwarmepumpe

Danke für deine Antwort @frankenmichl...

aber verräts du mir noch wie das Stückchen Software und wo ich es finde? 🤔

Bei meiner Anwendung handelt es sich um #OneWire und #USBaufRS232, nix Massenspeicher 😉

#USBIP

@nocci

#SmartHomeNG in Verbindung mit #KNX, gibt aber Plugins für alles mögliche... #MQTT, #Homematic, #DMX, #OneWire, #XMPP, #Sonos

Zur #Visualisierung verwende ich #smartVISU, da ich was webbasiertes wollte.

https://www.smarthomeng.de/

#homeautomation #smarthome #iot #RaspberryPi

SmartHomeNG | smarthome knx homematic mqtt hue 1wire home automation – Die Device Integrations-Plattform für Dein Smart Home

Oha , das war ein langer, steiniger Weg, liebe #OrangePi und #armbian Entwickler. Aber ich spreche nun erfolgreich mit #OneWire #DS18S20 Sensoren \o/

root@firestarter:/sys/bus/w1/devices/10-00080290196a# cat w1_slave
21 00 4b 46 ff ff 03 10 e2 : crc=e2 YES
21 00 4b 46 ff ff 03 10 e2 t=16562
root@firestarter:/sys/bus/w1/devices/10-00080290196a# cat ./hwmon/hwmon1/temp1_input
16562