ComfyZoneKommt in #nbsp. Es gibt bunt!
Aslak RaanesRE: https://mastodon.social/@aslakr/116109236869257782
Jeg beklager ellers at adressa ikke har klart å bruke mellomrom som ikke brekker i ny linje etter det som egentlig skal være – (ikke -) for sitatstrek.
Luketus of BorugeMöp... man darf in house- und senaträumen nicht fotografieren. seltsam, wie man überhaupt beweisen kann, dass ist das 02:00 uhr im #nbsp ist heute der bessere tag für alles was ich hören will, links rein, rechts raus | und das spiel verloren.
T_XThe #PIM + #BGP configs at the @chaotikumev / #Nbsp are also currently "documented" / dumped to this page: https://wiki.chaotikum.org/infrastruktur:host:dobby-setup. And will likely get a bit more tweaking until the #39c3. Later needs to be copied to the #dn42 wiki.
I had also hacked together a watchdog script which disables route imports+exports on the BGP #multicast channel in bird if a BGP neighbor does not also run a PIM daemon. This is to work around this issue which I mentioned a few days ago: https://wiki.dn42.dev/howto/pim-multicast-vs-unicast-issue
I had also hacked together a watchdog script which disables route imports+exports on the BGP #multicast channel in bird if a BGP neighbor does not also run a PIM daemon. This is to work around this issue which I mentioned a few days ago: https://wiki.dn42.dev/howto/pim-multicast-vs-unicast-issue
Audio test streams at @ffhl were now duplicated from their #IPv6 GUA (global unique addresses) to ULA (unique local addr.), for #dn42 compatibility. Not quite happy about duplicating, as it kind of defeats the purpose of #mulitcast, but getting GUAs in #dn42 accepted would probably be a difficult task. Has anyone NAT'd IPv6 mc before :D?
Next up will be to set up a #PIM multicast peering between @chaotikumev / #Nbsp and @ffhl. Getting #Freifunk and #dn42 multicast connected could be interesting.
Next up will be to set up a #PIM multicast peering between @chaotikumev / #Nbsp and @ffhl. Getting #Freifunk and #dn42 multicast connected could be interesting.
@tvluke @chaotikumev der Abfluss ist hier im #Nbsp wohl wieder out-of-order, sollte/könnte das noch auf die Webseite, damit Leute da zum OpenSpace heute wieder informiert sind?
FrankSo version 1.3 of my filament spool for #3dprinting with some useful updates is now officially released:
https://git.chaotikum.org/derderwish/filament_spool
It's in use for a few weeks in the #Nbsp of the @chaotikumev now and I think it works fine.
#lasercutting a spool is much faster than printing and it is very storage efficient when disassembled.
Thanks to #openscad it is adjustable, too.
Built a new prototype on the #lasercutter in the #Nbsp of the @chaotikumev:
a seesaw for our #RCCars
You can find the SVG and the #OpenSCAD source files here if you're interested:
https://git.chaotikum.org/derderwish/rc-seesaw