The Hero10 Black Bones is GoPro’s Answer to the DJI FPV Drone
#equipment #news #5k #dji #djifpv #dronecamera #drones #fpvdrone #fpvdrones #gopro #goprohero10black #goprohero10blackbones
GoPro Hero 10 Update Adds 24p, Max Lens Mod, and SuperView Support
GoPro has announced the availability of a new beta software update for the GoPro Hero 10 that adds support for the Max Lens Mod, the 5.3K SuperView digital lens, and additional frame rates across several resolutions.
The GoPro Hero10 Black launched in mid-September and boasted a larger 23-megapixel photo resolution and a better processor that allowed for 5.4K video to be captured at up to 60 frames per second and 4K video to be shot at up to 120 frames per second. While the camera was reviewed positively by PetaPixel 's Ryan Mense, it didn't support the filmmaker-preferred 24p framerate. That changes with this update, along with a few other bonuses.
The update adds Max Lens Mod compatibility to the GoPro Hero 10, which increases the field of view to an ultra-wide 155-degrees. The update supports stabilization and the GoPro's Horizon Lock feature as well. After the update, users can replace the standard lens cover with a Max Lens Mod. Before the camera can shoot with the mod, users will first need to swipe down on the camera's rear touch screen and tap the Max Lens Mod icon.
The update also adds new frame rates including 24 frames per second for use in film and television production. At 5.3K resolution (16:9), 5K (4:3), 4K (4:3), an full HD 1080 (16:9), 24 frames per second is now an option. Additionally, at 4K both 30 and 25 frames per second have been added.
GoPro says that all 24 frames per second settings for the Max Lens Mod will be available in a future firmware update. Auto-upload is not supported with this version of the firmware.
Finally, GoPro is adding 5.3K SuperView Digital Lens via the update. The SuperView digital lens is a 16mm view that takes GoPro's widest and tallest field of view and frames it in a 16:9 aspect ratio video. GoPro says this results in an ultra-immersive, full-screen shot that capture "more of everything." The company says that in order to access it, tap the digital lens icon any time during a 5.4K video capture and use the slider to select SuperView.
Because this update is a beta, it cannot be accessed through the GoPro Quick app and has to be manually updated to the camera. GoPro says that those who are unfamiliar with this process should visit its detailed explanation page that shows how to perform the update. As a note, GoPro specifically says not to download the firmware that is linked on that instructions page, but instead to use this link.
Full release notes can be found on GoPro's website.
#equipment #news #software #24p #actioncamera #firmwareupdate #framerates #gopro #goprohero10 #goprohero10black #maxlensmod #softwareupdate #superviewdigitallens
GoPro HERO10 Black Review: The Most Significant Refresh in Years
Every year like clockwork, GoPro introduces a new action camera with varying degrees of improvement upon the last. This year we have the HERO10 Black, the company’s second push into 5.3K video recording following the HERO9, but is there enough here to warrant buying the latest and greatest?
Design and Build Quality
The exterior of the GoPro HERO10 Black sees little change over the previous HERO9 Black released last year. Collectively, these latest models did up their overall size compared to the HERO8 Black and earlier generations in order to fit a new larger battery and front-facing display. Overall though, it’s still the same general boxy GoPro design we’ve known for a very long time: minimal physical button layout, touch-centric operability, and waterproof durability,
The replaceable lens cover is one physical piece that GoPro says it has made an improvement over the HERO9. The company now claims it has better scratch resistance and reduced ghosting. I wasn’t about to purposefully scratch that front element to test this claim, but after a few weeks of using the HERO10 out in the woods with plenty of scratchy things around and loaded into my backpack’s unpadded exterior pocket without much care, I have not seen any scratch of any depth or significance develop on the lens cover. It’s looking as good today as the day I took it out of the packaging.
The collapsable, two-prong mount at the bottom of the camera is the same as always, which means that almost every previous GoPro mounting accessory should be compatible. The only problem I can see arising is if a particular accessory you were hoping to use with it depended on the smaller pre-HERO9 form factor.
Jumping ahead a little, I have to bring up a new development on the inside of the HERO10 in order to explain the rest of the changes to the usability. With this camera, GoPro has introduced the GP2 processor. The previous GP1 processor was present in GoPros since the HERO6 Black in 2017, so it’s integration here a big deal. What this brings to the table for usability is higher frame rates on the front LCD display for smoother live previews, faster boot times, and my personal favorite: a more responsive touch interface.
Even with the HERO9, using the touch controls would sometimes cause hair loss because of how all over the place it is. Sometimes it would work really well and make me question if I’m just an idiot all the other times. Mainly, it would be its old self of not recognizing my taps or swipes unless I tried it over and over and over in a slow, exaggerated manner. While wearing touch-enabled gloves, the HERO9 just wouldn’t have anything to do with me.
This is noticeably changed with the HERO10 on all counts. I’ve yet to fumble with a control or swipe gesture, and testing it with gloves works as good as my naked fingers. This has always been my biggest gripe when taking out the GoPro and trying to set it up for a shot, and I’m happy to report it appears to be fixed.
Video Quality
In addition to the operability improvements, the new GP2 processor makes vast improvements to the video recording capabilities by doubling the maximum frame rates across the board. Where the HERO9 did 5.3K at 30p, the HERO10 can do it at 60p. Likewise, it doubles from 4K 60p to 4K 120p and 2.7K 120p to 2.7K 240p. Clearly, this new processor open up a lot of new potential for those wanting these higher frame rates.
The HERO10 also introduces a new “3D noise reduction” algorithm. From testing, it appears that between ISO 100 and 800 that the image quality holds up and looks great for a 1/2.3-inch sensor. ISO 1,600 is about where I’d stop pushing it as it takes its first big hit to image quality in terms of noise and detail. By ISO 3,200, the image gets too "mushy" for my liking, and at the ISO limit of 6,400, I’d consider it basically unusable unless you’re capturing iconic Sasquatch footage.
HyperSmooth 4.0 in the new GoPro is the company’s latest version of electronic image stabilization. From what I saw, it works really well when handholding the camera and standing stationary for static shots or even panning around. It’s also really good for real active movements like running. However, the in-between of walking forward slowly to capture something more “cinematic” looking isn’t quite as stable as I hoped.
One of my favorite aspects about the newer GoPros is the in-camera horizon leveling. Previously on the GoPro HERO9, I could tilt sideways up to 27 degrees and the scene would still look perfectly level. This is especially great for setting up a quick tripod or mounted shot and not having to mess with precise leveling each and every time. Now, the HERO10 allows up to 45 degrees of tilt and the viewer would be none the wiser.
In the video below you can see the point where I go past 45 degrees and get a sense of what kind of tilt was truly happening behind the scenes. Remember, when the footage starts to rotate to show the true orientation, that’s not me making a quick zero-to-45 degree movement with the camera. I was teetering around 44-degrees before going over the limit and that’s when the video shows any change. I’m very impressed with this feature.
Image Quality
This camera is also capable of shooting 23-megapixel stills, including RAW file output. Whether you should take advantage of this depends on your use case. The images clearly look like something off of a GoPro or smartphone -- there is no magic happening there. However, a lot of times that’s good enough. With the GoPro, I’d be more willing to use it rather than my phone for special circumstances -- such as anywhere near water or more precarious situations -- otherwise, I don’t see the results being worth the time to take out of my bag over just reaching into my pocket for the iPhone.
RAW image files from the camera do have some leniency in shadow recovery.
The HERO10 does have a set of virtual lens options, but from my testing, it appears that sticking with the native wide lens for photography is going to yield the best results. As shown below, the narrow option used in the same scene completely lacks detail.
GoPro HERO10 photo using the Wide lens setting. GoPro HERO10 photo using the Narrow lens setting.
A Refresh of Significance
With the introduction of the new GP2 processor, GoPro has made a new camera that’s hard to ignore as just another refresh. The HERO10's ability to record video in 5.3K at 60p and 4K at 120p makes it stand out. Additionally, the improved touch interface and in-camera leveling make it so much easier to work with while out in the field. The downside is the stills image quality, where the photos don’t appear much different from the smartphone most of us already carry. Again, on the flip side, the GoPro can be set up in ways where I wouldn’t trust my phone hanging out or attached to things. I just wish the quality was better.
Are There Alternatives?
There are a couple of alternatives to the new HERO10. First, there’s always the option to get the previous model and save a hundred bucks. GoPro releases new versions each year, and all the marketing hype the company put into the last product is generally going to hold up in spite of the new comparisons that can be made. This year that gap in performance is a lot wider than it has been in previous years, however, thanks to the HERO10's new processor.
The next alternative would be the DJI Osmo Action, however retailers such as Adorama don’t stock it anymore and Amazon no longer sells it itself. This could signal that we are on the brink of a refresh that may be worth waiting for. This action camera came out in mid-2019 and features dual screens, 4K 60p video recording, electronic image stabilization, and a waterproof design.
Should You Buy It?
Yes. With the GoPro HERO10 Black, the company continues to improve upon features that were already impressive. This release effectively doubles the video performance and makes noticeable changes to responsiveness over previous generations.
#equipment #reviews #5k #actioncamera #camerareview #compactcamera #gopro #goprohero10 #goprohero10black #slowmotion #videocamera #vlogging #waterproof
GoPro Admits Hero 10 5.3K Mode Overheats in 20min Under ‘Zero Airflow’
GoPro recently announced the new Hero 10 Black camera that boasts better photo resolution and up to 5.3K video. But that increased resolution means more heat, and GoPro admits that without sufficient airflow, it can overheat.
In a review for the GoPro Hero 10 Black from GadgetsBoy, the camera was found to overheat and shut down after about 20 minutes of continuous recording.
"The thing to bear in mind is that this overheats," he says. "We tried it out to record for as long as possible and it just shuts down after like, 20 minutes… if you just have continuous recording."
GadgetsBoy does not specify the conditions upon which the record limit was tested, but Digital Camera World reached out to GoPro to find out if this was an expected performance result. GoPro seems to be speaking from the perspective that the camera record time was tested in a controlled, still, indoor environment, and the company responded that while yes it can happen, the assumed testing parameters from GadgetsBoy are not what the company considers to be a normal shooting experience.
Processing at high-performance modes requires a lot of power, so GoPro has put safeguards in place to protect consumers and the cameras from overheating when the camera reaches a certain temperature. The HERO10 is engineered to support what we know a majority of HERO owners use the camera for: to shoot shorter clips in environments with natural airflow.
GoPro’s research shows that 75% of videos shot on GoPros are less than a minute and ten seconds. HERO10 Black can record 5.3k at 60 fps for 20 minutes with zero airflow -- approximately 16x the average length of a GoPro video. HERO10 Black can record 4k at 60fps for 25 minutes with zero airflow -- more than 21x the length of an average GoPro video.
So for the filming scenario when long clips at highest resolutions in a static environment are required, we recommend taking the necessary steps to provide some airflow. This will improve the camera’s thermal performance and allow for longer video capture.
While it is always disappointing to hear that there are recording limitations with camera equipment, GoPro does make good points in its response.
Given the size and sealed nature of the GoPro, what the company has said here makes a lot of sense. Promising high-resolution 5.3K video capture at 60 frames per second for 20 minutes is not a terrible specification, and it could be considered downright impressive once the small size of the camera and is taken into consideration.
The note about airflow is also important since GoPro cameras are designed to be used as an action camera, and while certainly possible, it does seem unlikely that a GoPro would remain in an environment for 20 minutes of recording without any airflow. In such cases where it might not get that required airflow, limitations of are to be expected.
However, GoPro did not specify what the recording limits would be if the device is given adequate airflow in temperate conditions.
The GoPro Hero10 Black is available for $400 with an included one-year GoPro subscription or $500 without a subscription.
#equipment #news #23megapixel #actioncamera #airflow #gopro #goprohero10 #goprohero10black #goprohero9 #goprohero9black #goprooverheating #overheating #software #stabilization
GoPro Unveils the Hero10 Black: 23MP Photos, 5.3K Video at 60fps
GoPro has officially announced the Hero10 Black featuring a larger 23-megapixel photo resolution and a better processor that allows for 5.3K video at up 60 frames per second and 4K video at up to 120 frames per second.
The GoPro Hero10 Black, , while leaked at the end of August, is no less impressive now at its official launch. The company has updated the processor to the GP2 which it says delivers a mix of better image quality and higher frame rates, including 2.7K video at 240 frames per second, 4K at up to 120 frames per second, and 5.3K at up to 60 frames per second. That processor also promises a "snappier" user interface.
The Hero10 uses a new 23-megapixel sensor that GoPro promises will include better low light performance. Additionally, GoPro has enabled the ability to pull 19.6-megapixel video stills to be pulled from 5K 4:3 video at 30 frames per second and 15.8-megapixel video stills from 5.3K video at 60 frames per second.
GoPro uses sensor stabilization that it calls HyperSmooth, and the Hero10 features HyperSmooth 4.0 which the company says evens out even extremely shakey video feeds. It uses in-camera horizon leveling that has an increased tilt limit of 45-degrees in high-performance settings -- up from 27-degrees -- which the company says makes even the most chaotic footage look smooth and steady.
DCIM100GOPROG0011172.JPG
GoPro has three featured ways to access captured footage from the Hero10. First, it can auto-upload the most recent footage to a Gopro cloud account while it is charging. A GoPro subscription is available for $50 a year or $5 per month. Second, it can wirelessly offload from the camera to the GoPro Quik app 30% faster than the Hero9 could. Finally, the new USB sired offload option transfers content from the camera to the Quik app on a smartphone that the company says is 50% faster than wireless. While GoPro does not specifically mention it, it is also very likely possible to remove the microSD card and import footage using a computer.
The GoPro Hero10 ships in plastic-free packaging and includes a reusable case, which is part of GoPro's mission to remain environmentally conscious.
The GoPro Hero10 Black is available for $400 with an included one-year GoPro subscription or $500 without a subscription.
#equipment #news #23megapixel #actioncamera #gopro #goprohero10 #goprohero10black #goprohero9 #goprohero9black #software #stabilization
Niepopularna opinia Bóbr Kurwa
petapixel (unofficial)
heise online (inoffiziell)
