Need to look into sealing our apartment floors, walls, pipes etc. from our under neighbour cig smoke. Ain't got a clue where to start though. Any tips? Something I can DIY? #smoke #secondhandsmoke #diyhelp
Okay nerds (affectionate). I spent not a little time DuckDuckGoing earlier for advice on this front, but wasn't able to get sufficient information that satisfied me, so I'm #AskingFedi for advice from #DIYers and other creative people.

As of late, I've been finding myself out at night in areas with less street lighting and whatnot (think local parks that don't close at sunset, but at a set time year round). I picked up a pair of small LED headlamps on sale today to help with that. Set to the low setting, they're fine, and I'm usually using my phone while out doing these things... but it occurs to me that since I have two of these, it might not hurt to modify one to a more night vision friendly red color instead.

Most information I've found for projects of this sort are designed for small 2x AA or AAA wand style flashlights, and usually are just like "buy some red wrapping cellophane and rubber band a couple to few layers over the end of the flashlight" which given the form factor of my light isn't ideal. I did also eye tape designed for temporarily fixing car tail light housings, but wasn't sure how well something like that would work on a flashlight.

How would
you go about making a red lens cover/filter for a small headlamp? I attached a picture of the units I bought, if that's a help for what sort of advice you might give.

Edit: More information that's come up in the replies I've gotten so far: I don't have a soldering iron and don't think I know anyone local with one I can borrow, so replacing the LED with a red one is probably not within the budget constraints I had in mind here. It does look like the front plate of the light will come off with a hex or star bit if I do find a soldering iron to borrow, so that idea isn't completely out. Someone has suggested I look for a broken bike tail light and rig up an attachment with magnets, so I might poke my nose in at a local bike shop and see if they have anything broken they could spare or sell on the cheap. Magnets are easily picked up from the place I bought the headlamps originally. I'm still open to other ideas if anyone has anything else for me to consider.

Thank you to everyone who's replied so far!


#AskFedi #AskFediverse #DIYHelp #DIYAdvice #RedLightFlashlight #DIYRedLight ​

I've got as far as packing two small boxes. I'm trying to get all my bird feeders packed up, but I set up my feeding station many years before I worked in bikes, so I didn't know the importance of greasing joints. The feeder pole is over 2m high, so I need to dismantle it to store it.

So far I've tried pouring boiling water over the joints then spraying GT85 onto it and also squirting it into the opening of the pole so it can work from the inside too. Stop giggling in the back. No sign of it loosening, so I'm going to let it soak and reapply the GT85 every day or so. It doesn't help it's raining. Also doesn't help that I'm physically very weak.

What do you think my chances are? The last resort is sawing it at the joints. It's a good strong pole, they don't make them like this anymore, so I'd like to save it.

Lesson: always grease metal joints and reapply grease every year or so.

If anyone has any other ideas, please share.

#donemessedup #birdfeeders #diyhelp

Does anyone know anything about shoving slipped conservatory roof panels back into place? We appear to have a leak 🙄💦😕

#DIYhelp

Looking for some help finding a manual or other technical information for a Parker Compumotor servo, P/N CM233XE-00146
I've tried my best to search for it myself but I haven't had much luck!

I already have the motor driver package but I need to figure out how the power cable is set up and I'd rather not tear one of the motors apart to find out if I can help it!

I've also reached out to Parker support but given these parts are discontinued and I got th 2nd hand I don't think I'll get much help but we'll see..

#diyelectronics #diyhelp #electronicshelp #electronics

All these bearings no longer do what they are supposed to do. Roll well. What am I supposed to do with these now? They dont look serviceable?

#bearings #bearing #inlineskating #skateboarding #skateboard #rollerblades #diy #diyhelp #trash

Does anyone know how I can loosen the right most coupling in this picture? It seems to have been tightened with some kind of "grease" but not grease.

If it is of any help, the coupling says 210 made in USA. It is attached to a double threaded connector piece attached to the pressure meter. Rotating the coupling rotates the pressure meter. Wrench 19 fits.

I want to replace it because my pneumatic coupling stuff doesn't fit.
#diy #askfedi #diyhelp #pneumatics #Compressor #air #help #question

13 DIY Ways To Add Character To A New Build Home

https://ift.tt/NBECvxd

Looking to improve the look of your builder-grade home? Here are 13 simple DIY ideas to add character to a new home.

Message: Giving your home character is a simple process. These #DIYprojects are great ways to start. #DIYhelp

February 19, 2025 at 07:14AM

#DIY #DiyHelp Does anyone know what the screw on ring of a ceiling light that holds the lampshade in place is called please so I can order another one? Many thanks
I have 1 wall painted purple. The rest white. I'm tempted to do more purple. But it's a small room. Will that make it feel smaller? #DIYHelp