Mastodawn

Kelvin n0mql EN35ld Jan 19, 2025

Just worked VA3EWV POTA in Ontario, from my easy chair in the back yard shed.
iPad #TeamViewer to #MacLinux #flrig to run the HF rig.
RX audio from HF to #Behringer mixer, to AnySpot musician’s monitor transmitter on 584.4MHz. FT5D HT at 433.5MHz sends my voice back into the shack, to MacLinux box no.2, running #CubicSDR, the output of which hits Line In on the HF rig. VOX handles keying. He gave me a 5-9. Seems like he could hear me clearly.
#HamRadio #AmateurRadio

Kelvin n0mql EN35ld Oct 7, 2024

I've got #CubicSDR running, outputting to the Mac Mini (linux) headphone jack.

Then I've got pavucontrol running a Monitor of Stereo Output, & set the Recording Input to be that same Monitor.

Then #QSSTV is listening to the PulseAudio Sound Server.

Shown, it's on the APRS 2m frequency, just so I can SEE some signal making it all the way through.

Now I'll QSY it 145.800 for #ARISS #SSTV

Show thread

ꙮ 𝄃𝄁𝄂𝄀𝄀𝄁𝄃🇫🇯🇱🇨🇱🇧Jul 31, 2023

Ага, работает… коммерсант fm
#SDR #radio #радио #CubicSDR #macOS

Show thread

Matt (W1CDN)Aug 25, 2021

After more than a year (and so many other things happening in the interim), I tried tuning up 20m on the #RTLSDRv3 with #cubicsdr. Turned on Q-branch direct sampling and was able to pick up the tail end of (one side of) separate QSOs by N0LOT and AA5RN.

Looking at my notes, my attic dipole is a bit long for 40m at 405 inches per leg.

[migré] @[email protected]Jul 20, 2021

Dites, vous utilisez quoi comme #soft pour faire du #SWL avec une clée #tnt #rtlsdr ? pour ma part j'utilise pour l'instant #cubicsdr ça tourne plutôt bien et il est simple à installer. Mais si vous en connaissez d'autres plus intéressé, jesuis preneur www.cubicsdr.com

Lup Yuen Lee 李立源 Mar 5, 2021

#LoRa Chirp in real-time action ... 64-byte LoRa packet ... Transmitted by Hope RF96 connected to #RISCV #BL602 ... At 923 MHz with 125 kHz bandwidth ... Captured by #CubicSDR with #Airspy R2 SDR

https://youtu.be/9F30uEY-nIk

Show thread

Matt (W1CDN)Mar 31, 2020

Thanks to @Dubby, at least I can get on http://n8mdp.dyndns.org:8904/ and see what sort of things I should be seeing from the #RTLSDRv3 here.

I need to spin up Linux and try that, maybe #cubicSDR is not playing nice.