Yvan ー イボん 🗺️  20h ago

https://odysee.com/@rossmanngroup:aa/i'll-put-up-10,000-to-teach-bambu-labs-a:4

#bambulabs #law

I'll put up $10,000 to teach bambu labs a lesson

Odysee
imagcon2d ago
Bambu Labs 3D-Drucker lokal und ohne Cloud betreiben, das geht jetzt deutlich besser mit dem Open Source Projekt Bambuddy! Läuft sogar auf einem RasPi.

remscheid-it.de/2026/05/08/bambuddy-bambu-lab-drucker-ohne-cloud-betreiben/

#3DDruck #Bambu #BambuLabs #Bambuddy #OpenSource #FOSS
Bambuddy: Bambu-Lab-Drucker ohne Cloud betreiben | remscheid-it.de

Bambuddy: Bambu-Lab-Drucker selbst hosten, ohne Cloud-Abhängigkeit. Open-Source-Lösung für Maker und Betriebe, die ihre Druckdaten kontrollieren wollen.

remscheid-it.de
Annabelle KennedyApr 27

Anyone have any good tips other than “just scrub” to get #Bambulabs #ThermalGrease off your hands?

Replaced the thermistor and heater on my #HotEnd for the first time and it took me ages to get most of it off my hands however there’s still tiny little flecks left…

The Oracle WokStationApr 11
Annoyingly printer 2 has started saying "external force on sensor 1" again. It happened earlier, then went away. Did a print, and then homed the printer at which point out threw the error again.
I moved the bed up and down error didn't clear. I turned it off and on and the error was gone, bed homed fine.
I've got no idea what's going on with it. #3dprinting #bambu #bambulabs #p1s
JamesApr 8

I #3dprinted a new case for an old #atari7800 i bought on ebay with a boken case for cheap. I thought it came out super nice with the two color filament using my #bambulabs #3dprinter. I used this #atariage link as a model.
https://forums.atariage.com/topic/320563-i-present-to-you-the-7800jr-case/

#atari

Show threadPaul CutlerApr 2
And my CircuitBambu repo has been updated with the code from the Qualia example: https://github.com/prcutler/CircuitBambu/ #CircuitPython #BambuLabs
GitHub - prcutler/CircuitBambu: Monitor your Bambu Labs 3D printer using CircuitPython

Monitor your Bambu Labs 3D printer using CircuitPython - prcutler/CircuitBambu

GitHub
Paul CutlerApr 2
Made a new UI built on the circuitpython-bambulabs library for my 4" Qualia display. #CircuitPython #BambuLabs
Paul CutlerMar 30
New blog post (2 days in a row!?) - circuitpython-bambulabs published: https://www.paulcutler.org/blog/2026/03/30/circuitpython-bambulabs-published/ (With a special thanks to todbot and foamyguy) #CircuitPython #BambuLabs
circuitpython-bambulabs Published! - PaulCutler.org

Paul Cutler's blog and homepage

Paul CutlerMar 27
Whoa, I got #CircuitPython to connect to my #BambuLabs 3D Printer using Bambu Cloud (local connection not working yet, I think that's because local uses MQTT 3.1.1, not 5.0)
Show threadFishdMar 20

OMG... a website does it!!!

Well done #bambulabs!

#rant #internetofshit