zkaIt's official, I'm a seamster ... Here's my first garment, a muslin prototype of a summer shirt.
Don't look too closely, there's many construction issues 😅
Eureka Jeans1940s Lee Riders (6)
Looking today at the way the waist band is sewn on. There are many different ways of doing this, and there's a great deal of difference depending on the brand and the period in which the jeans were made.
1940s Lee Riders use this old method which is very easy to do and requires only a regular single-needle lock stitch machine. No folder or other special equipment is needed. This method was actually also used by Levi's until the early 1900s, when they started attaching the waist band using a chain stitch.
Characteristic of this method is that the stitch on the inside falls off of the waist band in most areas around the waist. This is often misunderstood to be a "mistake". Actually, the stitch is intended to run off of the waist band, just below it. The few places where it runs on to the waist band could actually be considered real "mistakes". The purpose of sewing the stitch "in the ditch" is to protect the cotton thread from friction and thus make the garment last longer. This is actually the same method that was used a lot by Lee, Levi's and many other brands for sewing the cuffs and the collar onto denim jackets, and it makes a lot of sense because the cuffs, the collar and the waist band are all parts that sustain a lot of friction on the inside.
It is one of my favorite ways of doing the waist band, and I use it on quite a lot of the jeans that I make.
#vintagedenim #vintagejeans #realvintage #waistband #lockstitch #stitchintheditch #lee #leeriders #eurekajeans
Looking today at the way the waist band is sewn on. There are many different ways of doing this, and there's a great deal of difference depending on the brand and the period in which the jeans were made.
1940s Lee Riders use this old method which is very easy to do and requires only a regular single-needle lock stitch machine. No folder or other special equipment is needed. This method was actually also used by Levi's until the early 1900s, when they started attaching the waist band using a chain stitch.
Characteristic of this method is that the stitch on the inside falls off of the waist band in most areas around the waist. This is often misunderstood to be a "mistake". Actually, the stitch is intended to run off of the waist band, just below it. The few places where it runs on to the waist band could actually be considered real "mistakes". The purpose of sewing the stitch "in the ditch" is to protect the cotton thread from friction and thus make the garment last longer. This is actually the same method that was used a lot by Lee, Levi's and many other brands for sewing the cuffs and the collar onto denim jackets, and it makes a lot of sense because the cuffs, the collar and the waist band are all parts that sustain a lot of friction on the inside.
It is one of my favorite ways of doing the waist band, and I use it on quite a lot of the jeans that I make.
#vintagedenim #vintagejeans #realvintage #waistband #lockstitch #stitchintheditch #lee #leeriders #eurekajeans
