Designed From Scratch And Fully Handmade: The Modular Coleman Z80 Computer
While the phrase "I built my own computer" might sound impressive to the uninitiated, anyone with an interest in modern computer hardware knows that there's really not much to it: buy a case, a motherboard with a CPU, some RAM and peripherals, and you're pretty much there. What's way more impressive is designing a complete computer system from the ground up, as [Joshua Coleman] just did when he built the Coleman Z80.
And when we say "from the ground up", we mean it: everything down to the system bus was hand-drawn by [Joshua] himself. It does share something with modern PCs though: a strictly modular design. There's a Z80 CPU board, a ROM and RAM board, and even two modules that you could describe as a video card and a sound card. All of these are built on prototyping boards with a 40-pin edge connector and hooked up to a single backplane carrying the main system bus.
Designed as an experimentation platform, the Coleman Z80 has many features that enable testing and debugging, such as an adjustable clock generator and a few beautiful vintage LED displays that show the status of the main bus. Input and output are mainly through a serial link and a 16×2 LCD, but [Joshua] is already planning a keyboard interface and composite video output to give it that proper 1980s home computer vibe. The software is currently limited to a ROM monitor that enables basic I/O commands, but with 256 KB of RAM there's plenty of potential for writing useful software.
Just as impressive as the design itself is the fact that this was [Joshua]'s first electronic design project; we've certainly seen worse first projects! Over the years we've featured several cool homebrew Z80 computers, such as a super-minimalistic board, a modular system based on the powerful eZ80, and this cute little one that fits inside an Altoids tin.
#retrocomputing #16x2lcd #homebrewcomputer #modularhardware #z80
Modular Pockit Computer Is More Than Meets The Eye
"Modular" and "Computer" have historically been on the opposite ends of a rather awkward spectrum. One could argue that a hobbyist grade PC is modular, but only to a point. Re-configuring it on the fly is not readily possible. Modular laptops are slowly happening, but what about handheld devices, where our needs might change on a regular basis?
Enter the Pockit: a fully modular IoT/edge computing device that can be reconfigured on the fly without having to reprogram it. Don't browse away from this page without watching the demonstration video below the break. It just might be the "mother of all demos" for the current decade.
A modular base provides basic computing power in the form of a Raspberry Pi, like many other projects. The base has twelve magnetic connectors, each with twenty I/O and power pins. When a module is added, the operating system detects the new module and loads an appropriate program on the fly. When more modules are loaded, it automatically configures itself so that all modules have a purpose. This allows the Pockit to be an integrated IoT device, an edge computing powerhouse, a desktop computer, a Blackberry-esque handheld, or a touch screen tablet, and so many more things.
For example, if a camera is added, it displays an image on a screen -- if there's a screen. If a button is added, it automatically takes a picture when the button is pressed. If you want the camera to be motion activated, just add a motion sensor. Done. External devices can be controlled with relays and home automation integrates almost seamlessly.
There are a great number of features that we're glossing over for the sake of getting to the point: Go watch the video and when you're done, perhaps you'll be as astonished as we are. We've expressed our love of modular hardware like the Pockit in the past, and after watching this demo, we can only hope that this is what the future of computing and electronics looks like!
#computerhacks #raspberrypi #modularcomputer #modularhardware #motherofalltechdemos #pockit