Raspberry Pi Pico I2C LCD Interface with MicroPython: Step-by-Step Guide https://microdigisoft.com/i2c-lcd-interfacing-on-raspberry-and-micropython/ #16x2LCD, #I2c, #RaspberryPiPico

Designed From Scratch And Fully Handmade: The Modular Coleman Z80 Computer

While the phrase "I built my own computer" might sound impressive to the uninitiated, anyone with an interest in modern computer hardware knows that there's really not much to it: buy a case, a motherboard with a CPU, some RAM and peripherals, and you're pretty much there. What's way more impressive is designing a complete computer system from the ground up, as [Joshua Coleman] just did when he built the Coleman Z80.

And when we say "from the ground up", we mean it: everything down to the system bus was hand-drawn by [Joshua] himself. It does share something with modern PCs though: a strictly modular design. There's a Z80 CPU board, a ROM and RAM board, and even two modules that you could describe as a video card and a sound card. All of these are built on prototyping boards with a 40-pin edge connector and hooked up to a single backplane carrying the main system bus.

Designed as an experimentation platform, the Coleman Z80 has many features that enable testing and debugging, such as an adjustable clock generator and a few beautiful vintage LED displays that show the status of the main bus. Input and output are mainly through a serial link and a 16×2 LCD, but [Joshua] is already planning a keyboard interface and composite video output to give it that proper 1980s home computer vibe. The software is currently limited to a ROM monitor that enables basic I/O commands, but with 256 KB of RAM there's plenty of potential for writing useful software.

Just as impressive as the design itself is the fact that this was [Joshua]'s first electronic design project; we've certainly seen worse first projects! Over the years we've featured several cool homebrew Z80 computers, such as a super-minimalistic board, a modular system based on the powerful eZ80, and this cute little one that fits inside an Altoids tin.

#retrocomputing #16x2lcd #homebrewcomputer #modularhardware #z80

Arduino Caller ID Display is Better Late than Never

It's no secret that the era of the landline telephone is slowly coming to a close. As of 2020, it was estimated that less than half the homes in America still subscribed to plain old telephone service (POTS). But of course, that still amounts to millions upon millions of subscribers that might get a kick out of his Arduino caller ID developed by [Dilshan Jayakody].

The completed HT9032D board.

Truth be told, until this point, we hadn't really given a lot of thought to how the caller ID system works. But as [Dilshan] explains, you can actually pick up a dedicated IC that can decode incoming caller data that's sent over the telephone line. In this case he's using a Holtek HT9032D, which comes in a through-hole DIP-8 package and can be picked up for around $2 USD. The chip needs a handful of passives and a 3.58 MHz crystal to help it along on its quest, but beyond that, it's really just a matter of reading the decoded data from its output pin.

To display the caller's information, [Dilshan] is using an Arduino Uno and common 16×2 HD44780 LCD. As a nice touch, the code will even blink the Arduino's onboard LED when you've missed a call. As a proof of concept there's been no attempt to condense the hardware or ditch the breadboard, but it's not hard to imagine that all the components could be packed into a nice 3D printed enclosure should you want something a bit more permanent.

We've seen caller ID data being collected in previous projects, but they used a USB modem combined with a software approach. We really like the idea of doing it with a cheap dedicated IC, though we'll admit this demonstration would probably have been a bit more exciting a decade ago.

#classichacks #phonehacks #16x2lcd #arduinouno #callerid #characterlcd #decoder