Folks, this is a little story about always trying your crafting best because you never know who will end up seeing your work.
This is from my local maker space discord channel. James is a kick ass engineer and I had, prior to this, good naturally given him some shit about not cleaning out the bed of the laser machine after he used it last. 1/n
#lasercut #LaserCrafting #Dragon #howtotrainyourdragon
I decided to get a set of plastic putty knives to serve as laser masking lay down scrapers for myself. I then had to design a laser crafted holder. ๐
https://forum.makerforums.info/t/laser-masking-scrapers-and-holder/93298
Made a laser crafted sign to go outside the laser room of my local makerspace. Very happy with how it turned out. I did a blog post over on Maker Forums on the make. (see link)
https://forum.makerforums.info/t/makerspace-laser-room-sign/92959?u=nedman
At my local maker space (Cape Fear Makers Guild) we have a brand new 60W Omtech CO2 laser. Iโve been doing projects that I hope will inspire members on things that you can do with a laser machine. I decided that the room housing the laser need a sign signifying that it was the Laser Room! The base of the plaque was cut from 1/4" birch plywood and stained blue. Then sealed the wood with several coats of a clear spray. I was planning to use keyhole hangers to mount the plaque so I did s...
And finally, I had to to a little job to check the maintenance operation (laser alignment) had good results, so I used a wood leftover to engrave something nice. I went for "Framasoft campaign 0 Main menu" par @davidrevoy , @Framasoft โ CC-BY 4.0 (this image was designed for Framasoft's 2017 campaign "Contributopia", I really like it !)
Here is the original picture :
https://www.peppercarrot.com/fr/viewer/framasoft-src__2017-10-09_framasoft-campaign_0_Main-menu_by-David-Revoy.html
Still made at the @RoseLab in Toulouse
#lasercut #LaserCrafting #laser #toulouse
3/3
NedMan ๐
Denkodama