2026 Green Power Challenge: NFC Powers Command Write and Wake of MCU
Modos Flow is a 13.3 inch E Ink monitor with a 60 Hz display, open source firmware, touch & stylus support (crowdfunding)
The Modos Flow is an upcoming portable monitor with a 13.3 inch, 3200 x 2400 pixel E Ink display designed to offer a paper-like viewing experience during extended read and writing sessions. But there are a few things that make this ePaper display unlike some similar devices.
It has a custom board with firmware that enables screen refresh rates as high as 60 Hz, allowing you to use it as a […]
#crowdfunding #eInk #eInkDisplay #eInkMonitor #modos #modosEnchanter #modosFlow #openSource Read more: https://liliputing.com/modos-flow-is-a-13-3-inch-e-ink-monitor-with-a-60-hz-display-open-source-firmware-touch-stylus-support-crowdfunding/
E-Ink Ekranlar her seferinde kapanıp açılmadan saniyeyi gösterebiliyorlarsa neden hiç bir elektronik alette görmüyorum!
OLED bile görüyorum, ama E-Ink Ekranlı bir cihaz henüz görmedim!
Ben de, kapanıp açılmadan saniyeyi gösterebildikleri zaman yaygınlaşacaklar diye bekliyorum!
Oysa zâten gösterebiliyorlarmış!
Tamam pahalılar, ama OLED Ekranlardan da mı daha pahalılar?
Oysa E-Ink Ekranların aydınlatma güneş ışığında soluk kalma gibi dertleri de yok!
I have tested the XIAO ePaper DIY Kit (ESP32-S3) – EE04 from Seeed Studio in depth. While its 6-color Spectra 6 display is impressive out of the box, I wanted to see if software could overcome hardware limitations. In this post, I’ll share how I’ve pushed this hardware to its limits by using dithering techniques […]
TRMNL 7.5″ (OG) DIY Kit is a battery-powered $45 E Ink display with WiFi, a battery, and dozens of software plugins
TRMNL sells a $139 small E Ink display that you can use to show news updates, weather forecasts, calendar appointments, photos, or all sorts of other content. But TRMNL isn’t just a hardware company – the team also makes the open source software that runs on that device, and even shares information on how to turn a jailbroken Amazon Kindle or other devices into a DIY TRMNL device.
Don’t have […]
TRMNL is a $139 WiFi-enabled E Ink display with open source firmware (you can also make one from a jailbroken Kindle)
TRMNL is a small E Ink screen that you can mount on a wall, place on your desk, or put just about anywhere to display a stream of information. First launched through a Kickstarter crowdfunding campaign in 2024, you can now buy a TRMNL device directly from the company’s website for $139 to get a unit with a 7.5 inch, 800 x 480 pixel E Ink display, support for WiFi, and up to 3 months of […]
Ich hab eine Idee, aber keine Ahnung: Ich hätte gern einen Anstecker mit E-Ink-Display und Anzeigenwechsel per Knopfdruck. Also ein magnetischer oder ansteckbarer Button, der zwischen mindestens zwei Anzeigen wechseln kann.
Anwendungsbeispiele:
• "Ich nutze WERO" → Knopfdruck → QR-Code zum Bezahlen erscheint
• "Ich nutze Threema/Signal" → Knopfdruck → QR-Code zur Kontaktaufnahme erscheint
• Namensschilder mit wechselbaren Informationen
• Stimmungsanzeiger für nonverbale Kommunikation
Fragen an die #Fediverse-Community:
- Kennst Du ähnliche Projekte?
- Wer könnte so etwas umsetzen?
- Was sind realistische Kosten?
- Fallen Dir weitere Anwendungen ein?
- Welche #Hashtags sollte ich ergänzen oder ändern?
Meine Inspirationquelle:
https://www.linkedin.com/posts/timo-heck-92880120a_dailyreminder-activity-7315599512465534976-efs8
#Wearables #EInk #WERO #Threema #Signal #EPIWallet #EInkAnstecker #WearableTechDE #EpaperProjekte #TechAccessoires #MakerCommunityDE #Cyberwear #Wearables #EInkBadge #MakerMovement #WearableTechnology #TechDIYChallenge #EInkDisplay #eink #epaper
13
flo
Brad Linder
Kemal ASLAN
N-gated Hacker News
Wizards Anonymous
Spar|fin|dig :: Jan