Announcing the inaugural 2025 Speedcafe Driver of the Year
For the first time, Speedcafe is recognising the achievements of Australia’s and New Zealand’s best drivers in a…
#NewsBeep #News #Headlines #DriveroftheYear #NewZealand #NZ #slot1
https://www.newsbeep.com/335212/
Supercars news: Mostert, Wood get first Toyota Supercars laps
The Toyota Supra testing at Queensland Raceway in October. Image: Richard Gresham The two primary Walkinshaw Andretti United…
#NewsBeep #News #Headlines #AU #Australia #ChazMostert #RyanWood #slot1 #WAU
https://www.newsbeep.com/298523/
Supercars news: Bathurst 1000 winner’s big takeaway from Adelaide Grand Final clash
Ryan Walkinshaw punches the air as the incident unfolds on the TV screens. Image: Fox Sports That’s the…
#NewsBeep #News #Headlines #AU #Australia #BrocFeeney #ChazMostert #RyanWood #slot1
https://www.newsbeep.com/284720/
Supercars news: Ford’s hopefuls praying for Sandown 500 rain
Thomas Randle in the Larry Perkins-inspired Sawtooth Castrol #55 Ford Mustang at Sandown Raceway. Just above the cut-off…
#NewsBeep #News #Headlines #AU #Australia #slot1
https://www.newsbeep.com/251481/
Supercars news: Competitor dies following medical incident at The Bend
The Bend Motorsport Park. Image: InSyde Media The death has been confirmed by Motorsport Australia via a short…
#NewsBeep #News #Headlines #AU #Australia #slot1
https://www.newsbeep.com/120032/
Supercars teams call for rule changes to avoid ‘boring’ Bathurst 1000
Cameron Waters (left) and Kai Allen (right) were second and third respectively in the third Supercars race at…
#NewsBeep #News #Headlines #AU #Australia #slot1 #Supercars
https://www.newsbeep.com/52856/
A slotket caddy if you need one for #pentium3 #slot1 systems like the #440bx.
I'm not a great 3d modeller as you can see but it. works ;)
A holder for sloket adapters for pentium 3 slot 1 motherboards.Means that the sloket is held firmly rather than 'flapping around'There are lots of different slotket designs out there so you may need to modify the holding rails a bit.Tolerances are quite tight - depening on the mood of my printer, had to scale X to between 97 and 100% and Y from 96%-100% to make sure it fitted over the slot.
The shift to #Slot1 by #Intel and then its abandonment after the #Pentium3 #CPU stopped me from upgrading Lucifer 😢:
"Socket To Me", Tedium (https://tedium.co/2023/04/15/processor-socket-history/).
News Beep
squelch41
रञ्जित (Ranjit Mathew)