Anyone got any tips on where to buy good quality SMD parts and PCB header sockets in the UK?

Farnell have everything I need in stock, but because I haven't reached £50+VAT I'm going to get stung an extra £10 for delivery.

Just wondered what other people are using.

#electronics #retrocomputing #pcb #smdcomponents

PnPAssist: A “Smart” Build Platform For Manual PCB Assembly

Open source pick and place machines have come a long way in the past years, but are not necessarily worth the setup time and machine cost if you are only building a few PCBs at a time. [Nuri Erginer] found himself in this situation regularly, so he created PnPAssist, a "smart" build platform to speed up manual PCB assembly. Video after the break.

The PnP assist consists of a small circular platform that can automatically translate and rotate to place the current footprint in the middle of the platform, right in the center of your microscope's view, and a laser crosshair. The entire device can also rotate freely on its base to avoid contorting your arm to match the footprint orientation. Just export the PnP file from your favorite PCB design software, load it on a micro SD card, plug it into the PnPAssist, and start assembling. The relevant component information is displayed on a small OLED display right on the machine. [Nuri] has also created a component organizing tray that will indicate the correct compartment with an RGB LED.

Below the build platform, a 3D printed gear is in contact with a pair of parallel lead screws driven by stepper motors. The relative motion of the lead screws allows the platform to rotate, translate, or both. This arrangement also means the machine is a lot more compact than a conventional XY-table and can be packed away when not in use. The base is held firmly in place on the workbench with a set of suction cups or screws. Power is provided through the fixed base using a slip-ring, so there are no cables to twist up as you spin the machine around.

We can certainly see this machine being a massive help on any small electronics assembly job, especially considering the fast setup time and relative simplicity. It will also work well with the 3D printed component dispensers or component turntable we featured in the past.

The HackadayPrize2021 is Sponsored by:

#thehackadayprize #toolhacks #2021hackadayprize #pcbassembly #pickandplace #smdcomponents