The Humanoid Hub (@TheHumanoidHub)

Foundation Robotics가 텐던(힘줄) 구동 방식의 로봇 손(tendon-driven hand)을 개발 중이라는 소식입니다. 텐던 기반 구동은 유연한 관절 동작과 정교한 그리핑을 목표로 하며, 로봇 핸드 하드웨어·제어 연구와 실세계 조작 응용에 영향을 줄 가능성이 있습니다.

https://x.com/TheHumanoidHub/status/2021408325418746162

#robotics #robothand #tendondriven #roboticshardware

The Humanoid Hub (@TheHumanoidHub) on X

Foundation Robotics is working on a tendon-driven hand.

X (formerly Twitter)

Nicolas Halftermeyer (@halftermeyer)

SharpaRobotics가 CES2026에서 미세 동작에 강한 고성능 로봇 손을 선보였습니다. 가격표는 약 US$52,000이며, 핑퐁·종이접기·블랙잭·원격 조작 등 실황 데모가 완벽하게 이루어져 높은 조작성과 정교한 핑거 제어 능력이 확인되었습니다. CES 무대에서 주목받은 상용급 로봇 핸드 제품입니다.

https://x.com/halftermeyer/status/2010852386240176614

#robotics #ces2026 #sharparobotics #robothand

Nicolas Halftermeyer 🇫🇷🇪🇺🇺🇦 (@halftermeyer) on X

The most impressive robotic fingers at #CES2026? @SharpaRobotics US$52,000 hand. Live demos (ping‑pong, origami, blackjack, remote ops) were flawless. @CES @lukas_m_ziegler @Fabriziobustama @jblefevre60 @Ronald_vanLoon @Rainmaker1973 @CyberRobooo @planeterobots @TheHumanoidHub

X (formerly Twitter)

Min Choi (@minchoi)

간단한 선언문과 함께 '로봇 손이 이제 인간의 속도와 정밀도를 능가한다'는 내용이 공유되었습니다. 해당 트윗은 로봇 핸드(로보틱 손) 분야에서 인간 수준을 넘어서는 속도·정밀도 달성이라는 연구·개발 성과나 마일스톤을 알리는 것으로 해석됩니다. 구체적 출처나 기관은 트윗 본문에 명시되지 않았습니다.

https://x.com/minchoi/status/2005414789103906848

#robotics #robothand #automation #ai

Min Choi (@minchoi) on X

It's over Robot hand can now achieve beyond human speed and precision 🤯

X (formerly Twitter)

A teenager built an advanced robot hand entirely from Lego pieces.

A four-fingered robotic hand built from Lego Mindstorms pieces can push, pull and grip with almost as much force as a leading 3D-printed hand.

https://mediafaro.org/article/20251024-a-teenager-built-an-advanced-robot-hand-entirely-from-lego-pieces?mf_channel=mastodon&action=forward

#Robotics #Lego #RobotHand #LegoMindstorms #UK #Bristol

A teenager built an advanced robot hand entirely from Lego pieces.

A four-fingered robotic hand built from Lego Mindstorms pieces can push, pull and grip with almost as much force as a leading 3D-printed hand.

New Scientist
🚀 Presenting the 'Hand', an open-source robot hand that promises to revolutionize... touching stuff? 🖐️ But fear not, it's on #GitHub, where you too can unleash your inner Frankenstein with code and artificial intelligence that makes your existing code look like it was written by a hyperactive squirrel on caffeine. ☕🐿️
https://github.com/pollen-robotics/AmazingHand #OpenSource #Robotics #AI #Innovation #RobotHand #TechnologyRevolution #HackerNews #ngated
GitHub - pollen-robotics/AmazingHand: Code and model to control the AH!

Code and model to control the AH! Contribute to pollen-robotics/AmazingHand development by creating an account on GitHub.

GitHub

Later this season, Claire Asher will chat to Dr. Antonia Tzemanaki from the University of Bristol and Bristol Robotics Laboratory. Her research includes human and robot hands, hand exoskeletons, haptics and wearable robotics, with applications in surgery, rehabilitation and extreme environments.

Send us your questions for Tonia in the comments or on our website: https://robottalk.org/ask-a-question/

#Robots #Robotics #RobotHand #Exoskeleton #Haptics #WearableTech #Surgery #Rehabilitation #Space #Nuclear

Ask a question - Robot Talk

Send in a question for a future guest using the form below.

Robot Talk - The podcast exploring the exciting world of robotics, artificial intelligence and autonomous machines.
Robot Hand Has Good Bones

What do you get when you mix rigid and elastic polymers with a laser-scanning 3D printing technique? If you are researchers at ETH Zurich, you get robot hands with bones, ligaments, and tendons. In…

Hackaday
Robot Hand Has Good Bones

What do you get when you mix rigid and elastic polymers with a laser-scanning 3D printing technique? If you are researchers at ETH Zurich, you get robot hands with bones, ligaments, and tendons. In…

Hackaday

@Independent

Woo! #RobotHand 👏🙌

Veiled #ITCrowd href 💯😝

Big 3D Printed Hand Uses Big Servos, Naturally

[Ivan Miranda] isn’t afraid to dream big, and hopes to soon build a 3D printed giant robot he can ride around on. As the first step towards that goal, he’s built a giant printed hand bi…

Hackaday