SwiftOnSecurityWe have this system at work where you have to manually read and type out the estimated number of impacted systems before it lets you issue a command.
| Website | https://manuel-feller.net |
Manuel (码奴) Feller
- 34 Followers
- 138 Following
- 996 Posts
Frontend Engineer at BI X (http://bix-digital.com), I like good food and taking pictures & videos in free time. Interested in too many things for the time I have on this planet. All opinions are my own.
NomiChirpsDoes anyone know a museum or other institution that would be willing to take this large vintage railway wheel(?) press? It's marked "Chambersburg Engineering Co., No. 863", and a long time ago it was used to help maintain rail cars at the Port of San Francisco. Unfortunately it's going to the scrap yard this week because no museums we've tried are willing to come haul it away. boosts appreciated.
edit: Sorry folks, there was less time than I thought. It's already out the door this morning 😔
Jay Kuo
Commander KEEN 🖤♥️
RadkolumneHey #Bahn, schließ mal #Wero an. Und gib das gesparte Geld uns weiter - danke 😊
https://demoshops.de/bahn-wero-bezahlen/
https://demoshops.de/bahn-wero-bezahlen/
NathSomewhere, someone finally made this and I think it's beautiful: https://www.thingiverse.com/thing:4687836
Ethernet | RJ45 clip to secure/repair/fix broken tab by guss67
This clip was design to fix/repair/secure the broken or loose tab of a RJ45 Ethernet connector and avoid crimping. Designed to prevent from moving, wiggling, falling from the connector and easy to install.UPDATE v.4.9 | 28/01/2021Added the 3 following files which have slightly wider body (0.25mm) than 4.7 version and small upgrade on the tip.1. "4.9.nf.supported" (extension) comes "with supports" for the ones are not very familiar with. But I still prefer S3D's supports.2. "4.9.nf" (extension) with "no fillet", to make it easier printing with supports.3. "4.9" (extension) with fillet, for "smooth edges". On FDM printers isn't that much noticeable.UPDATE v.4.7 | 01/01/2021Added another version with "no fillet" (".nf" extension), actually it has sharp edges to make it easier printing with supports.PrintingSuggested printing orientation is the one as the files are stored, why?Printing the tab from the base to the tip in X-Y axis makes it stronger and more flexible since its printed in one continued string.If you change the orientation with the tip on top then tab's base will start from the bottom and builds up while the Z axis is sticking the rest of it till the tip. With this orientation the tab has more possibilities to brake since Z layers don't bond the same as the method I suggested.*If you have another solution let me know.Supports Supports needed and you need to be experienced with good slicer settings. Also attention needed when removing them from the actual print.Or you can print the file with "4.9.nf.supported" (extension) which comes with supports. But I still prefer S3D's supports.Installation note:1.Before install the "printed clip" check the left overs of the broken tab. If it is too long the tip of the "printed clip" might not click underneath the left-over. So, I suggest to leave a length of the broken tab about "0,5-1,0mm". If the broken tad left-over is to small or cuted flash then the printed one might not click and hopefully that would work well, haven't tested that scenario.2.Follow the sketches to install the "printed clip", also while sliding in if you find it a bit hard some wiggling might help.*You may call it the "ScorpioNet" or "Devil's Network Tail"! Designed in InventorIf you enjoy and want to support my work you can donate me on the link below,Thank you!
HiddeIf you're curious how much of WCAG can be automatically tested (a FAQ I get), this page displays testing rules (ACT) by Success Criterion https://www.w3.org/WAI/standards-guidelines/act/rules/
As a companion, there is also @SteveFaulkner's excellent “Mind the automation gap” https://html5accessibility.com/stuff/2025/03/27/mind-the-wcag-automation-gap/
Marc-Uwe Kling
gloriouscowone can immediately tell from my commit history when I work on my CI workflows
- add new CI build workflow for mac
- fix build error in new CI build workflow for mac
- adjust fix for mac CI
- trying another way?
- fix
- fix #2
- fix #3
- please work?
- why
- i am going to quit programming and go raise sheep
Eleanor SaittaI'm looking for places where a capability system is exposed to users (not developers) in an understandable, well-designed way in non-experimental systems. Anyone have suggestions?