2 Followers
14 Following
6 Posts
The Stream of bad news from iX systems continues.
Sehr interessant! Ein Dateisystem, welches Datenintegrität (hashing) prüft und ggf Fehler korrigiert, ist wärmstens empfohlen. USB-Sticks sind nämlich nicht gerade für Qualität bekannt.
Who needs printing ? 😃
..and avahi and its abominations shall burn in hell. 🔥
No, clearlinux is unfortunately not alive. it's as desd as the PC pictured.
Amazing 👏
Clearlinux

Matching state for software and hardware.
Using Raspberry Pis sometimes comes with kernel messages interfering with your initial configuration dialogue: "undervoltage detected❗️"
When this happens DietPi displays a yellow lightning in top right corner of screen to, what a nice feature. 😃
Well challenge accepted, how can this be?
USB Charger was good, one made for Raspis, delivering astonishing 5.33V (measured) with a max of 3A. Obviously the culprit is somewhere else.
I heard about faulty USB cables before and so it was time to test them all.
Having voltage meter set up and connected to 5V+GND, running stress-ng for full load on CPU was a good test case.

Results? Amazing! 🤩
About 40% of my USB-A to USB micro cables made issues and the good ones had quite a spread.
The best measured only a drop from 5.33V to 5.15V at full losd of my Raspi 3B. The not so good ones dropped below 5V but didn't lead to "undervoltage detected!".
Most interesting was identical cables having very different results.
Which leads me to conclude that testing is always good, also seemingly identical hardware.

#raspberrypi #raspi #dietpi #undervoltage #cable #error
@[email protected] That is probably a Logitech K380s Pebble Keys 2 which is also Logi Bolt compatible.
I cannot find any info too. It looks like a GPL violation.
Nice try fooling people, that do not know that this thinkpad has one RAM module soldered and one slot for expansion wirh a SO-DIMM module.