I'm bummed I did not manage a contact with the ham satellite that was in Medium Earth Orbit (MEO). The amateur radio satellite up there Greencube required quite a bit of skill to reach that bird (and life intervened here right before the satellite was decomissioned). 6000km+ from the earth. (ISS is at 400km... Starlink satellites are only at 550km). The moon is 363,300 km away from earth, and reachable via ham radio, but it requires significant antennas to send/receive signals there. (there is a repeater planned for the moon, though).
#Greencube #hamradio #space https://stationproject.blog/2023/07/04/greencube-io-117-setup/
Greencube (IO-117) - Setup, Software, and Operation

Putting together a station and the software to use Greencube (IO-117) is not difficult. Greencube (IO-117) Station Setup is covered....

Our HAM Station

First time /p operations with my new IC9700 on #greencube.
Stunning #Radio in combination with the Alaskan-Arrow Antenna.

Starting to achieve WAJA-Award via #satellite now. #hamradio

New antenna for IO-117 #amsat #greencube
Turns out @carstengrn1 's Greencube Terminal, as well as #uz7ho soundmodem, work well on Linux under Wine. Now even I can enjoy #hamradio #greencube 🛰️ 🎊
Just worked Clipperton Island in grid DK50 via IO-117 #greencube #amsat #hamradio 🛰️
EL96 now confirmed #greencube #amsat

I worked the Greencube (IO-117) satellite today for the first time.

I managed to made 6 QSOs which was way better than I expected for a first attempt

Of those six, 4 were first time QSOs and I got 5 new grid squares and 2 new DXCC entities 😀

#AMSAT #GREENCUBE #MEO #QRP

Thanks @hz1am for Greencube (IO-117) QSO and DXCC #68 on SAT (5353.67 km 3326.62 miles) #amsat #greencube
Very little activity on #satellite RS-44 around 23:15Z, rather unusual for beginning of weekend. I wonder if all the cool kids escaped to #GreenCube nowadays.

Yayy!! It works!!!🤩🤩 Finally copied #Greencube #IO117!! 1st-ever decode goes to none other than @[email protected]!! Congrats🥳🎉

My TLEs are slightly off, so had to do the Doppler by hand... I'll also attach the antenna better😆 Still, also copied @[email protected] @[email protected] @[email protected] @[email protected] & others👍