Avro RJ85 1:500 - FDM
The Avro RJ85, an evolution of the British Aerospace 146, is a distinctive quad-jet regional airliner known for its characteristic high-wing design and low-noise performance, often utilizing its large wing area and flaps for steep approaches into city airports. Its power comes from four reliable Honeywell ALF 507 turbofan engines, which are key to its exceptional short-field capability and quiet operation.
This model is printed using an FDM printer, I hope you like it, thank you.
Here’s what each label means:
- FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls.
- SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines.
- SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
KC-135E 1:500 - SLA 2
The KC-135E, a legacy tanker variant of the Stratotanker family, primarily featured the TF33-PW-102 turbofan engines which provided increased thrust compared to the original J57 turbojets, enhancing its capability for aerial refueling operations. This model retained the flying boom system and served as a vital force multiplier before its eventual retirement, leveraging its robust airframe design for decades of service.
Here’s what each label means:
- FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls.
- SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines.
- SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
✈️ S-92A Helibus 1:400 - SLA 2 • STL files
➡️ Download 3D print model: https://cults3d.com/:3397260
💡 Designed by heri_3d
@cults3d #modelairplane #3dprinted #aviationlovers #diorama
S-92A Helibus 1:400 - SLA 2
The S-92A Helibus features a sleek, modern fuselage with smooth contours designed for stability and efficiency in flight. Its spacious cabin and large windows give it a distinctive profile often associated with VIP transport and advanced rescue operations. The twin-engine layout and high tail boom create a balanced, purposeful silhouette recognizable from almost any angle.
S-92A Helibus 1S-92A Helibus 1/400, this helicopter is printed with a resin printer, and here is a video link about how this helicopter is printed: https://youtu.be/kDWcNtzA1u8
Here’s what each label means:
- FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls.
- SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines.
- SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
✈️ B777-200 1:750 - FDM • STL files
➡️ Download 3D print model: https://cults3d.com/:65239
💡 Designed by heri_3d
@cults3d #modelairplane #3dprinted #aviationlovers #diorama
B777-200 1:750 - FDM
The Boeing 777-200 is a long-range, wide-body twinjet known for pioneering the ETOPS (Extended-range Twin-engine Operational Performance Standards) certification, allowing it to fly routes previously restricted to three- or four-engine aircraft. Its distinctive landing gear features six wheels per main bogie, a design choice necessary to distribute its significant weight on standard taxiways and runways.
Here’s what each label means:
- FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls.
- SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines.
- SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
✈️ Avro RJ85 1:500 - FDM • STL files
➡️ Download 3D print model: https://cults3d.com/:480224
💡 Designed by heri_3d
@cults3d #modelairplane #3dprinted #aviationlovers #diorama
Avro RJ85 1:500 - FDM
The Avro RJ85, an evolution of the British Aerospace 146, is a distinctive quad-jet regional airliner known for its characteristic high-wing design and low-noise performance, often utilizing its large wing area and flaps for steep approaches into city airports. Its power comes from four reliable Honeywell ALF 507 turbofan engines, which are key to its exceptional short-field capability and quiet operation.
This model is printed using an FDM printer, I hope you like it, thank you.
Here’s what each label means:
- FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls.
- SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines.
- SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
✈️ Embraer ERJ145 1:500 - SLA 1 • STL files
➡️ Download 3D print model: https://cults3d.com/:708443
💡 Designed by heri_3d
@cults3d #modelairplane #3dprinted #aviationlovers #diorama
Embraer ERJ145 1:500 - SLA 1
The Embraer ERJ 145 features a sleek, low-wing design and is characterized by its pair of rear-mounted AE3007 turbofan engines, giving it a distinctive silhouette. Its efficient supercritical wing profile and T-tail configuration contribute to its performance and stability as a regional jet.
This model is made for SLA printers and has never been printed before.
Here’s what each label means:
- FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls.
- SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines.
- SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
✈️ Embraer ERJ145 1:500 2 - SLA • STL files
➡️ Download 3D print model: https://cults3d.com/:3127538
💡 Designed by heri_3d
@cults3d #modelairplane #3dprinted #aviationlovers #diorama
Embraer ERJ145 1:500 - SLA 2
The Embraer ERJ145 is a slender, low-wing regional jet known for its long, narrow fuselage and distinctive 1–2 seating layout. Its twin rear-mounted engines and T-tail give it a clean, streamlined profile built for efficient short- to medium-range routes. The aircraft’s crisp panel lines, pointed nose, and balanced proportions make it instantly recognizable among regional jets.
ERJ 145 1/500 version with panel lines and two wings separated. And here is the previous version, https://cults3d.com/en/3d-model/architecture/embraer-erj145-1-500-sla. You can see how I printed it and its supports through this link, https://www.youtube.com/watch?v=aC8_9qfDehI, thanks for stopping by.
Here’s what each label means:
- FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls.
- SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines.
- SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
✈️ Northrop YF-23 Black Widow II 1:72 • STL files
➡️ Download 3D print model: https://cults3d.com/:137309
💡 Designed by heri_3d
@cults3d #modelairplane #3dprinted #aviationlovers #diorama
Northrop YF-23 Black Widow II 1:72
Update (04/26/2020): Sorry I forgot to do something, the STL file that I was supposed to attach was a compressed (.zip) file, so I just did.
The prototype stealth aircraft is a rival of the YF-22. I attach .pdf which consists of Description and Parts and Instructions.
✈️ Airbus A330-200 1:500 • STL files
➡️ Download 3D print model: https://cults3d.com/:511128
💡 Designed by heri__suprapto
@cults3d #modelairplane #3dprinted #aviationlovers #diorama
Airbus A330-200 1:500
This model is printed using an FDM printer, I hope you like it, thank you.
Heri_3d
Jo H ✈️