I’ve been gluing together a few pieces every day on my Nerdy Gurdy build. I had to buy some more clamps as the ones I built won’t work for any thin pieces. There’s a lot of waiting for the glue to dry with this build. But the frame is starting to take shape, which is exciting. But I’ve only done 24 out of 90 pages in the build manual.
As per instructions I’ve now been listening to Eluveitie while building.
Az önce seçkinin en sonuna Nigel Eaton tarafından 1 saat önce paylaşılmış yeni bir video yükledim.
Fakat bu seçkimi ilk video seçili olarak en başından paylaşmak istiyorum.
Mekanizmalara özel merâkım olduğu için Hurdy-Gurdy'e de kayıtsız kalamazdım.
#music #HurdyGurdy #folkmüzik
_______
• Hurdy-Gurdy Dinletileri:https://www.youtube.com/watch?v=jgXmxQQW5F4&list=PLK2SeKwythXjOLxAUSB3BCNaqxNuV-ELj&index=1
7 track album
Today I started gluing together the plywood pieces for the hurdy gurdy. I really hope I don’t mess up.
I have finished sanding all the plywood pieces for my Nerdy Gurdy Fortran build. Now I have started dry-fitting the main body to see how all the pieces fit together. It’s starting to look like half of a hurdy gurdy.
I should’ve changed sandpaper earlier, it was completely smooth before I realized it. But the coarse sandpapering of all the plywood pieces is done now.
Next up is doing the whole thing again with a finer grit sandpaper.
I’ve started to sandpaper the plywood pieces. So far I’ve sanded all 24 keys with a coarse grit sandpaper which took all evening. I will have to go over them again with a finer grit as well.
While waiting for the kit to arrive, I 3D printed parts for twenty glue clamps. I hope this will be enough. I also have a bunch of small clamps, and a few larger ones.
The glue clamps are made by the same guy who designed the Nerdy Gurdy. The 3D model is available on Thingiverse: https://www.thingiverse.com/thing:6517348
I’ve started with the Nerdy Gurdy build. I’m taking it slow, today I just removed all the pieces from the plywood. There were quite a lot of pieces, so it did take a while.
I’ve started with the Nerdy Gurdy build. I’m taking it slow, today I just removed all the pieces from the plywood. There were quite a lot of pieces, so it did take a while.
While waiting for the kit to arrive, I 3D printed parts for twenty glue clamps. I hope this will be enough. I also have a bunch of small clamps, and a few larger ones.
The glue clamps are made by the same guy who designed the Nerdy Gurdy. The 3D model is available on Thingiverse: https://www.thingiverse.com/thing:6517348
I’ve started to sandpaper the plywood pieces. So far I’ve sanded all 24 keys with a coarse grit sandpaper which took all evening. I will have to go over them again with a finer grit as well.
I should’ve changed sandpaper earlier, it was completely smooth before I realized it. But the coarse sandpapering of all the plywood pieces is done now.
Next up is doing the whole thing again with a finer grit sandpaper.
I have finished sanding all the plywood pieces for my Nerdy Gurdy Fortran build. Now I have started dry-fitting the main body to see how all the pieces fit together. It’s starting to look like half of a hurdy gurdy.
Today I started gluing together the plywood pieces for the hurdy gurdy. I really hope I don’t mess up.
I’ve been gluing together a few pieces every day on my Nerdy Gurdy build. I had to buy some more clamps as the ones I built won’t work for any thin pieces. There’s a lot of waiting for the glue to dry with this build. But the frame is starting to take shape, which is exciting. But I’ve only done 24 out of 90 pages in the build manual.
As per instructions I’ve now been listening to Eluveitie while building.
Glue clamps for building musical instruments, for example the Nerdy Gurdy (https://www.nerdygurdy.nl).Hardware needed:M8 threaded rod (> 15 cm for Nerdy Gurdy)2 x M8 nut1 x butterfly nut, or some other nut that can be tightened by hand8mm washer (optional)Jaap BrandMarch 2024
SuperIlu
Lord Doctor Olle W
Kemal ASLAN
BC BY-NC-SA
Siff
tomwsmf