Aman Valley Makers

0 Followers
0 Following
0 Posts
Pictures and projects of the Aman Valley Makers, a volunteer group in the Amman Valley MakerSpace in Cwmaman near Ammanford, Wales
The Amman Valley Maker Space is closed since April and will not open again with the same set of people. This account might therefore stay inactive.

@[email protected] is in charge of this account. For questions around the closure and future, please contact Louise from the Cwmaman Town Council. http://cwmaman.org.uk/contact-us/

Thanks for the time at the #fediverse!
Contact Us - Cwmaman Community Website

If you would like to contact us, or would like any help or advice, then don't hesitate to contact us using the form to the right, or the information below: For all Community Centre queries please contact: Marissa Sweeney Aris Community Centre Manager Cwmaman Community Centre 5 High Street Glanaman SA18 1DX Email:[email protected] Mobile 07776241865 […]

Cwmaman Community Website
Our polytunnel has an automatic watering system now. Richard brings in new plants. The volunteers want to support the council with this year's growing.
#men2men built a huge amount or #dormouse boxes for the #INCC today. In contrast to bird boxes, the hole is on the wall side.
Today, we are building #dormouse boxes for the #INCC.
We are preparing for the coronation. #3d printed crowns from https://thingiverse.com/thing:195852.
princess crown by mjmedien

A beautiful crown for little princess. Printable without Supports. Have fun

Zoe is working on our new volunteer website, currently hosted at https://ammanvms.hosted.quelltext.eu/. What is important to you to see on the front page of a makerspace?
Welcome! | Amman Valley Makerspace

Just recently, the #Creality3D CR-10-mini was repaired. Now, we have two 3d printers running! They still need some care to make them 100% smooth but it works for now.

https://ammanvalley.foss.wales/t/3d-printer-and-filament-update-5-3-23/255
3d printer and filament update 5/3/23

Hello Rob (@RobV), I went through the 3d printers and the filament and this is an update for you, also with questions: 3D Printer: Ultimaker 2+ works - sometimes there is a bit of under-extrusion. I wonder why. Might be the nozzle clogged a bit? 3D Printer: Creality-CR10 Mini - works - sometimes, it does make lumps and prints over it. I also made the bed higher. Ender 3 Pro - I found parts. I wonder where the printer is. The parts are in the clean room hanging shelve with the filament. Wanh...

Amman Valley MakerSpace
We #love #wood. These are just two of the lovely products from our makerspace. Mallets (quarter-sawn oak heads, maple handles, blind foxtail tenons) and 13 bird boxes made by #men2men.
This is an update to our last post about the #wormery: It is done! There are three stages for the bio waste and it closes up pretty well so the worms should not escape.
One more info screen with a box: The #RaspberryPi can switch the screen on and off automatically using a relais. The box is #3dprinted and contains a wall to protect electronics from the mains 230V. In the box, there is a normal plug socket. The lid is screwed on and transparent, so you can have a look inside. Everything you need to know how to build it yourself is on GitHub and #opensource! https://github.com/AmmanVMS/infoscreen This is a project by @[email protected]
GitHub - AmmanVMS/infoscreen: The info screens synchronized in the makerspace

The info screens synchronized in the makerspace. Contribute to AmmanVMS/infoscreen development by creating an account on GitHub.

GitHub