GentleMan GefMar 18
Every neighborhood needs one!
Show threadFritz AdalisMar 18
@SecularJeffrey @cR0w
Nah, just need a 3/8 6-point and a hammer.
Show threadcR0w   🏴‍☠️Mar 18
@FritzAdalis @SecularJeffrey No. Bad Fritz.
Show threadFritz AdalisMar 18
@cR0w @SecularJeffrey
Fine, 25/64 impact socket.
Show threadcR0w   🏴‍☠️Mar 18
@FritzAdalis @SecularJeffrey You're the reason impact sockets have to have warning stickers on them smdh.
Show threadFritz AdalisMar 18
@cR0w @SecularJeffrey
Okay FINE, instead of a hammer I'll use an air chisel and a quart of Kroil.
Show threadkajer :notverified:Mar 18

@FritzAdalis @cR0w @SecularJeffrey

you haven't lived until you have used a shake-and-break "improperly"

https://www.wivco.com/store/p3/Shake-N-Break%E2%84%A2.html

Shake-N-Break™

Rusted or Stuck Screw Remove for Air Impact Hammer

Wivco
Show threadcR0w   🏴‍☠️Mar 18

@kajer @FritzAdalis @SecularJeffrey Or a wiggly: https://www.mcmaster.com/products/socket-wrench-adapters/flex-socket-adapters~~/

( not to be confused with a wobble, of course )

McMaster-Carr

McMaster-Carr is the complete source for your plant with over 700,000 products. 98% of products ordered ship from stock and deliver same or next day.

Show threadFritz AdalisMar 18
@cR0w @kajer @SecularJeffrey
I hate u-joint adapters, they just fold up when you add torque.
Show threadkajer :notverified:

@FritzAdalis @cR0w @SecularJeffrey

get some o-rings to slip on the u-joint part

Mar 18 at 8:06pmWeb
Show threadFritz AdalisMar 18
@kajer @cR0w @SecularJeffrey
I guess? I also have wobbly extensions.
Show threadkajer :notverified:Mar 18

@FritzAdalis @cR0w @SecularJeffrey

https://www.youtube.com/watch?v=KXG-DEt4nuw