Phil (ascentale)Mar 14

I lost #BikeNite Q3 yesterday, I am very sorry! But here it is. Happy #BikeMorning for those in my time zone!

---

@pete asks:

We've had a fair few questions on tyres, tubes, and valves and it's apparent from responses that we've posters who run all manner of setups.

Q3. What do you run and why? (For eg, have you made a conscious decision or just used whatever came with your bike? Tyres: Chosen for ride quality, durability, grip? Tubes: latex, butyl, TPU? Tubeless: fave sealant? any insert? etc, etc …)

#BikeNiteQ #BikeNite #BikeTooter #Cycling #MastoBikes cc @bikenite

Show thread😀🚲Mar 14

#BikeNite A3 Schwalbe pick-up or super-moto-x in 20x2.35 or 26x2.5 on most of my #cargoBikes / other #eBikes, some with continental's e-rated contact tires. All have conti tubes with the metal schrader stem and sized wide enough to match the tire with less stretching & losing thickness. I ride on the wet & messy streets of SW Portland and nearby suburbs where broken pieces of cars accumulate in bike lanes, some gravel or soft/mulch trails, often for kid transport.

@ascentale @pete #BikeTooter

Show thread😀🚲Mar 16

#BikeNite A3 update: replaced the tire that got a flat on Friday, why is the new one not centering on the rim #BikeTooter ? I've ridden several miles and near 30mph on one hill, not feeling any irregularity in the rolling. Running 30psi (had it up to 65 and back down to 5 several times trying to realign the bead.)

@ascentale @pete

Show threadJef PoskanzerMar 17
@enobacon @ascentale @pete Same! No bumpiness, the tread is centered and doesn't wiggle, but the sidewall stripes do wiggle.
Show thread😀🚲
@jef @ascentale @pete this is definitely not matching the molded line, which seems fairly concentric to the stripe. I keep trying to deflate and reinflate, extra inflate, etc... It seems to go from wiggling around to stopped budging in about half a stroke of the pump. I'll have to take the wheel back off of the bike and get artisinal about it.
Mar 17 at 5:10amWeb
Show thread😀🚲Mar 17
@jef @ascentale @pete I left it at 65psi overnight and it seems to have straightened out.