PixRetroMar 1
Time for yet another #sidequest... I need help.. I have the desire to gut some old laptops to put #raspberrypi's in them... I know you can get driver boards for laptop monitors to give hdmi or other video inputs.. just unsure exactly what I need to get... One of them is a 17" 1440 x 900 resolution... The connector is 30 pin and I think 0.5mm pitch? It's half a mil between the pins though the pins are 1mm centre to centre... And the other is a netbook 10" screen 1024 x 600 with 2 x 15 pins
Show threadPixRetroMar 1
Bah... Had to continue in a 2nd post! If any #retrotech #retro #electronics peeps spot this can anyone tell me the name of the connectors to find the correct boards? Or if I can get away with making some kind of adaptor to use with something else? #whydoidothistomyself #gluttonforpunishment #onedayimayfinishsomething
Show threadChuck
@PixRetro I suspect that if you emailed that picture to Samtec application engineering (https://www.samtec.com/) they could tell you exactly what connector it was and send you a free sample if you wanted one to test against the one you have.
Connectors, Cables, Optics, RF, Silicon to Silicon Solutions

Samtec is the service leader in the electronic interconnect industry and a global manufacturer of Connectors, Cables, Optics and RF Systems, with full channel system support from the IC to the board and beyond.

Mar 1 at 6:32pmWeb
Show threadPixRetroMar 1
@ChuckMcManis thanks! I will have a look!