Tonight's philosophical question: If you were a very small bag of M2 size screws, where would you hide?

I've managed to use 3mm metric hardware everywhere so far in this project, but slim CD drives mount using 2mm screws. I own....... some, somewhere.

Close enough for tonight - this is a 3D printed mount for a slim CD/DVD drive. These things are a weird shape and take the smallest screws of any standard computer hardware, and it took three goes to get this good a fit.

The white residue on the face is just glue from the print bed - each part that makes up the final case will be cleaned first.

That's the last of the complex parts - most of the rest is stuff like mounting buttons, a cooling fan, and aesthetic tweaks.

Ugh, it's hard to buy a decent 80x80x15mm fan. I miss the days where there'd be 50 different brands of fans in every size overflowing in every computer shop. Now it's all $40 Noctuas and one out-of-stock Silverstone or Deepcool. The industry standardising on 120/140mm fans is great if you're building a PC in a standard gigantic size, but nothing much smaller.

Maybe someone'll rock up to the vintage computer thing tomorrow with a box of fans I can rifle through.

What are the chances that purchasing this actually results in receiving an honest-to-goodness Arctic Cooling product? https://vi.aliexpress.com/item/1005008470980722.html

There's plenty of biggish-brand stuff on Ali these days, is it just counterfeit nonsense or maybe the genuine product sold out the back of the factory? I doubt "Shop1104078524 Store" in China are an official Arctic reseller.

Five iterations in and I think the slim CD mount is final. The screw holes line up, the fit is snug but not too tight, and I have a pretty high degree of confidence it'll work.

See the scratches on the top of this drive? It's dated October 2009, but I bought it just a couple of years ago on eBay as a "new" cheap USB CD drive. You get what you pay for with cheap electronics, and apparently the cheapest price gets you a refurb drive from a junked laptop.

This next one might be more interesting than the same CD drive again. My printer can automatically swap filaments mid layer, so I wanted to try making a 3D printed fan grille with an embedded logo/text. Those letters weren't made separately and glued on - they're printed in place!

I have some tweaks to do to make the grille itself look neat and even, and purple on white was not a great colourway in the end, but I'm calling this a successful concept test. #3DPrinting @3dprinting@a.gup.pe @3dprinting

Here's where I'm leaving the project tonight. I fell in love with an asymmetrical front panel, but the reality is this is easier to balance and I think I have a source for okay 5cm fans that will work with this. It also frees up all four corners for mount points for all the side panels.

Downside is that it now looks like a horrified screaming robot, but that has its own charm and appeal too. Maybe there's still something wacky and asymmetrical I can do with power buttons and lights - any ideas?

15-pin gameport, PS/2 keyboard and mouse, and two sockets for that new-fangled USB standard that probably won't catch on. What more front I/O could you possibly want on a Windows 98 machine?

I've just made a fair bit more work for myself in fully kitting out this front panel, but I think all the "big" case problems are now solved.

The four horsemen of vintage PC enthusiasm: power button, reset button, power light, hard drive activity light.

The power and reset button parts extend through the faceplate to press buttons on a circuit board underneath. The two light glyphs will sit atop a super-thin 3D printed layer with a bright LED underneath, so the whole right side of the panel will glow.

The design and scale of the individual bits will change before the final version, but I'm pretty firmly wedded to this idea overall.

As for the LEDs, I'm hoping these will do the job. These are 15mm square diffused LED panels - they were Adafruit product ADA4040, but it doesn't look like they sell them anymore.

I can easily test what these will look like through a thin 3D print. If they're not bright enough, I can pivot to using super bright LEDs.

I won't need to worry about a current-limiting resistor in this assembly as PC motherboards do that anyway for their indicator LEDs.

Okay, that's working beautifully so far. The photo is exaggerating the brightness, but not by much! That's shining through two layers of 3D print - I might even increase that to dull it a little.

The intricate button holes on the left would require support material underneath to print this whole structure in one go, and my AMS is a little broken at the moment, so I can't actually do more than two different filaments in one print right now.

Okay, here's where the front panel sits after day seven. I have a pretty solid proof-of-concept for both the buttons and LEDs for the front buttons and lights - can anyone suggest a different reset button icon that isn't just a circle with arrows on it? Ideally it needs some mass in the middle.

Next step is the internal structure - I think the top and sides will be one U-shaped piece, but that means the front, back and base plate need to stand on their own, with a frame for the motherboard.

My plan to work on the internal structure has led me straight back to the CD drive again - I have a plan to attach the front, back and bottom panels together, but I want to get the front stuff fitting before I can print a full front panel. This kerjigger will screw into the front panel from the inside.

Modelling off this beat-up, second-hand, slightly bent in places drive probably delayed the project a couple of days due to wasting a few iterations on its own eccentricities.

I think I've entered a new phase with my #PCB design skills. Being able to sketch the layout in #Rhino3D where I'm relatively skilled, then export as SVG and then just line up the handful of actual components just so in Fritzing has been great.

Today I've discovered the existence of "single line" or "single stroke" fonts - apparently used in engraving, but also useful for text on PCBs. The one I'm using here is "MecSoft" from the Rhino people themselves: https://wiki.mcneel.com/rhino/engravingfonts

This is more or less how the top of the front panel will look when complete. These just look like static icons, but the power and X things are tactile push-buttons, and the star and disk will hide bright blue LEDs for status lights. (Ignore the little orange breakout board, that's just holding the buttons in place.)

This is 10cm wide, which is the full width of the final case.

The sparkly black filament hides many crimes, but not under-extrusion - I'll have to tweak that for the final panels.

Ok, decision time. What looks better: the 'split X' or the circle-with-arrow for a reset button? The circle's the better symbol but looks very similar to the power button. The X looks more balanced on the panel overall.

Both are perfectly functional as physical buttons, the total width and height of each glyph here is only 12mm so even an empty-ish circle works when firmly pointed at with a fingertip.

The circle version needs a bigger arrowhead, otherwise I'm happy with its appearance.

Here's the little setup I'm using to test these. The Pro Micro is just there to provide easy access to 5 volts and ground for the LEDs, the buttons don't do anything but make a satisfying click.

The camera likes to wash out the light under the indicators - in real life the effect is a much more even blue. The LEDs are these: https://www.adafruit.com/product/4040

A 0.1" pitch breadboard isn't quite the right spacing for this, but the tolerances are high enough for things to fit together right.

Some actual computer parts arrived - a CompactFlash to SATA adapter, a SATA-to-also-SATA-but-the-slim-optical-drive-version adapter, and then a dual parallel-to-serial adapter to connect both drives to the PC itself.

Using SATA drives simplifies the data cabling, but power cabling is still going to be a mess of adapters - the PicoPSU I have gives me one SATA and one 4-pin molex power plugs, but I need two SATA for the disk drives and one 4-pin "floppy" for the PATA adapter.

...and here's the next technical problem to solve: that dual SATA to PATA adapter is exactly as tall as the space it has between the motherboard and the side of the case. This is a very small component in the hand, but it becomes enormous when modeled in 3D with the rest of a compact computer.

I don't want to design my own right angle riser PCB thing for this, so I'll find a very short 40-pin cable extension and run it behind the motherboard or something.

Okay, I'm pretty much in love with this iteration of the front panel buttons and lights - this version of the reset button feels unexpectedly modern somehow.

The reset icon needs to be moved upward slightly for balance, I need to iron the top surface for neatness, and some other dimensional tweaks etc etc to make it physically mount well, but that's the hard work done.

Speaking of the top surface - I might print and glue on a 1- or 2-layer fascia for the front of the case for final prettiness.

It's starting to look like something.

There are flaws - some stuff didn't line up right, some lined up too well (there's one screw trying to poke through the front panel), I've stripped one plastic screw socket, and I appear to have forgotten to allow room for a fan grille of any kind. But these flaws are also lessons, and things I can fix, and I'm becoming quite excited by this little project!

In fact, looking at this now - I could probably print the front panel and all of these bits in one monolithic piece for strength. I've designed each individual part separately so I wasn't reprinting one large part over and over with tiny changes, but they don't have to stay modular.

One single part, printed with breakaway supports, and surfaces I can glue prettier faceplates with better finishing to, which then gets bolted to the rest of the case structure - I think that's the way forward now.

Hilbert curve fan grille! This idea has been kicking around in my head for a little while.

This wasn't procedurally or parametrically created - I actually drew the curve out to the size big enough to cover the fan opening, offset it by 0.5mm either side to create one long closed curve, and extruded it (the white part) on top of a plain square grid (the black part) before rotating at a jaunty angle, and cutting out a nice-looking section into the size I needed.

https://en.wikipedia.org/wiki/Hilbert_curve

I need a break from front panel stuff, so here's a quick early print of what will be the case's internal structure - this frame will physically connect the front, back and bottom panels. The motherboard will bolt directly to the front, some other stuff to the back.

This is mostly a sanity test of the four mini-ITX mount points, and to get a physical feel for the object itself - now that I can hold it in my hands, I have multiple ideas on how to attach and brace everything together.

I was so pleased with getting the first printed USB socket mount so perfect that I had to solder some pins on and see what it looked like with something plugged in on the other side.

The Windows 98 machine will only need two of these, for the occasional thumbdrive and keyboard/mouse when I'm not using PS/2, but the XP version will have four.

Another front panel I/O task ticked off the list. Having a gameport socket on the front of the case was actually the whole point of this project, and because it's from an actual Creative SoundBlaster it's even going to be the correct gold colour as per the PC-99 standard: https://en.wikipedia.org/wiki/PC_System_Design_Guide

There's a lot of force involved in plugging and un-plugging a gameport cable, so the structure around this port inside the case will be extremely chunky.

The last front panel thing is the PS/2 ports.

Here's what the front of the case looks like at the moment (with a few bits and bobs virtually strewn around it).

The PS/2 ports will take a little while to fully sort out - they will also have to be strong enough to resist a lot of socket force, but also they have to be installed in the first place. They'll just be passthroughs to the ports on the back, but physically arranging that requires solving a few design problems.

Here's my solution for front PS/2 parts on my 3D printed retro gaming PC - these gender changers will be mounted into the front of the case, and a cable will run from the internal port out the back of the case to the sockets on the motherboard.

I could have made this a single PCB that mounts sideways into the case, but of course I wanted to make it difficult for myself and have both PS/2 ports face "up", so they'll get stacked one on top of the other in some sort of 3D printed bracket.

V1 is close-but-not-quite. The holes don't exactly line up (I'm maybe one or even a half a millimetre off), but boards and ports are all held perfectly securely with this design, and while the front panel is a little thick, the mouse I plugged in feels like it's making a pretty solid connection.

The holes for the ports won't be printed in this orientation - they'll be nice and round and smooth, not jagged with layer lines and extra cruft from the nozzle.