One reason for rebuilding netatalk is I wanted to run TashRouter on the same machine. It’s doesn’t work right on the MacIPGW image because of the “split horizon” patch.

I can now freely use AppleTalk devices on EtherTalk, LocalTalk (PhoneNet!), and LToUDP (Mini VMac). This enables, for instance, printing to an ImageWriter II from my modern Mac running System 7.5 in Mini VMac! (There were lots of bugs to resolve to get the ImageWriter II working!)

#RetroComputing #VintageApple #VintageMac

One piece that's missing is AURP aka #GlobalTalk support. I'd like to avoid running a VM and have something more lightweight.

Luckily @DrJosh9000 has created jrouter which comes very close to accomplishing this! Remote zones are showing up but are all empty and not sure if my zone is visible outside. I need to play with some settings some more I think. But soooo close!

https://gitea.drjosh.dev/josh/jrouter

#RetroComputing #VintageMac #VintageApple

With netatalk, a TashTalk hat, TashRouter, and CUPS on the Raspberry Pi, we can do clever things like share a #ImageWriter II printer over #LocalTalk with an iPhone using AirPrint!

This screenshot was printed from my phone to the ImageWriter II.

Interestingly, this was just fixed in the latest netatalk 2.3.2!

#LiveLaughLocalTalk #RetroComputing #VintageApple #VintageMac

In the interest of science, I did an ImageWriter II comparison print of CUPS vs the MacPalette driver for Classic. I think MacPalette wins here. There appears to be better color range and the text is a little sharper.

#RetroComputing #VintageApple #VintageMac #LiveLaughLocalTalk #ImageWriterII

I lifted some halftone settings and stuffed them into the ImageWriter II foomatic PPD and did some test strip prints.

At both resolutions, the result seems to be the same? So maybe that’s not the setting I need. Maybe it can’t be changed? MacPalette II still wins here!

#RetroComputing #VintageApple #VintageMac #ImageWriterII

Ok #AppleScript folks: how do you make MacOS 9.2 automatically print a PDF that appears in a specific folder?

#VintageApple #VintageMac #RetroComputing

So I have a new MacOS 9.2.2 #AppleScript Folder Action attached to a network share via netatalk. It works only if these conditions are met:

1. The folder is open already in the Finder. If it’s closed, it never triggers.
2. The new item is added to the folder from the current machine. Items added remotely to the network share do not “refresh” therefore never trigger the action.

Is this expected?

#RetroComputing #VintageApple #VintageMac

Ok, I've abandoned Folder Actions as it just doesn't seem to work. I've now gone with an always-running #AppleScript to scan the folder.

And.. it works! Almost? It seems that MacPalette II crashes (and takes Acrobat Reader with it) after it completes a print and there's a finder dialog that's proving difficult to dismiss in AppleScript.

#RetroComputing #VintageApple #VintageMac

The way it works is this:

1. A print is initiated from a device to the CUPS-PDF driver on my #netatalk Raspberry Pi.
2. The resulting PDF is placed in the AFP share of netatalk/afpd.
3. An emulated PPC Mac 9.2.2 running the #AppleScript below is watching for new files in that folder and will print them using Acrobat Reader to the #ImageWriterII via #LocalTalk using the MacPalette II driver.

It works, but crashes with dialog that I can't auto-dismiss.

#RetroComputing #VintageApple #VintageMac

@billgoats In theory yes. System Events is supposed to do that, but I can't seem to summon it, even on this fresh MacOS 9.2.2 + AppleScript 1.8.3 install.

To get keystrokes to work, I had to use to "Sigma's Additions" OSAX and use the "type text" command (that's all it has).