@kkarhan @siege ah but have you stepped on one of these? 😁

@tinyfluffs @siege The UK sockets are technically deprecated both mechanically and electrically and if you want a friggin' fuse, put that into the device at the back and have some good quality breakers instead...

All those #IEC connectors - espechally IEC60906-1 - are electrically, mechanically and otherwise far safer and more secure.

@tinyfluffs @siege

The only reason the #EU didn't make #IEC60906-1 mandatory like #USBc is because the retrofit would take 75 years and create 700.000t of otherwise 100% avoidable #eWaste per year during that time!
https://en.wikipedia.org/wiki/IEC_60906-1#Possibility_of_acceptance_in_European_Union

IEC 60906-1 - Wikipedia

@kkarhan @tinyfluffs @[email protected] I disagree after building large equipment with many of these. The connectors don’t lock in place, and half of the time you end up troubleshooting because one of them has worked itself loose and needs to be reinserted a bit deeper to get contact again.

@doc @tinyfluffs @siege well, those connectors ain't designed with any retention locks or other mechanical fastening, which is a valid issue.

#IEC60309 doesn't have that issue (tho it's obviously quite bulky for what it is) and thus is the de-facto standard in Europe and espechally Germany for connecting industrial appliances...
https://en.wikipedia.org/wiki/IEC_60309

IEC 60309 - Wikipedia

@doc @tinyfluffs @siege

Tho for no good reason did #Perilex not get replaced for ovens & stoves with it and instead we got worse shit in the form of screw terminals like some pre-WW1 electrical devices...

@kkarhan @tinyfluffs @[email protected] yea that socket would be a bulky pain. I wonder if there’s a milspec connector that could be used.

@doc @siege well, besides #Neutrik-Collars there are retension systems for #IEC Cables...

Seen them several times at work.

Would love to maoe a pic, but sadly that doesn't fly cuz ITsec, InfoSec & OpSec as well as NDA says no.