On sale now: the Dirt Cheap J-Link Adapter

with 2x5 1.27mm and 2x10 2.54mm headers!

plugs directly into every jlink, even the mini!

supports 3v3 mods!

https://www.dirtcheaphackingtools.com/product/dirt-cheap-jlink-adapter

#segger #jlink #hacking #jtag #smallbusiness #shop

All in one SEGGER J-Link adapter fits both J-Link and Mini on one convenient board https://www.dirtcheaphackingtools.com/product/dirt-cheap-jlink-adapter

[ ](#jtag) [ ](#swd) [ ](#jlink) [ ](#segger) [ ](#breakout) [ ](#hacking) [ ](#hardware) [ ](#electronics) [ ](#smallbusiness) [ ](#fedishop)

GigaDevice GD32VW553-UNIFI – A $2+ WiFi 6 and Bluetooth 5.2 LE wireless IoT module

GD32VW553-UNIFI is an inexpensive wireless IoT module based on GigaDevice GD32VW553 RISC-V microcontroller featuring 2.4 GHz WiFi 6 and Bluetooth 5.2 LE connectivity, and offered with a PCB antenna or IPEX antenna connector. The GD32VW553 MCU integrates 320KB SRAM and 4096KB on-chip flash, and supports link rates of up to 114.7 Mbps over WiFi and 2 Mbps over Bluetooth LE. The UNIFI module exposes 18 GPIOs from the microcontroller and is available in two different temperature ranges: -40 to +85°C or -40 to +105°C. GD32VW553-UNIFI specifications: SoC - GigaDevice GD32VW553 CPU - 32-bit RISC-V processor up to 160 MHz with RV32I/M/A/F/D/C/P/B instruction extensions Memory - 320KB (288 KB + 32KB shared) SRAM Storage - 4096 KB flash Wireless WiFi 802.11b/g/n/ax compatible 802.11i (WPA, WPA2, WPA3). Open, shared key, and pair-wise key authentication services Single antenna 1x1 stream in 20MHz channels upport of 802.11ax MCS up to MCS9 with a Max

CNX Software - Embedded Systems News
CLion 2024.3 EAP 4: New Embedded Development and Debugging Features | The CLion Blog

The new CLion 2024.3 EAP build, 243.19420.28, is out. You can download it for free from the link below, via the Toolbox App, or as a snap package if you’re using Ubuntu. DOWNLOAD CLION 2024.3 EAP

The JetBrains Blog
https://www.nordicsemi.com/Products/Development-tools/nRF-Command-Line-Tools/Download?lang=en#infotabs #NordicSemi : hi @NordicTweets is there any #opensource tool to deploy firmware on #Linux because #Segger #NrfjProg 's libnrfjprogdll.so fail to load (EINVAL) here
nRF Command Line Tools - Downloads

Nordic Semiconductor

#zephyr
#debug
#tool
#SEGGER

Converting ST-LINK On-Board Into a J-Link
https://www.segger.com/products/debug-probes/j-link/models/other-j-links/st-link-on-board/

ST-LINKをJ-Linkに変換することができるのか
これをすると元に戻すのはどうするのか

ST-LINK On-Board

SEGGER offers a firmware upgrading the ST-LINK on-board on the Nucleo and Discovery Boards. All you need to know. Learn more at SEGGER.